Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
If you plan to change coolant hoses this is a must-have labor-saving tool. This is one cleverly designed tool. I could not have done it better myself. I actually use to make a couple of different types before I found this one.
This removable threadlocker is probably the best that I have used. It has the best sealing cap and cures rapidly and reliably when confined between metal parts. Use it to lock threaded fasteners, nuts, bolts and screws from loosening. Extremely important in critical engine and suspension parts.
Good used set of original wiper arms. Fit all 126 chassis sedans from 1981 to 1991. The wiper arm will often wear out at the base and get sloppy (that is what can make the clanking noise). These have good joints and springs.
If you work around your Mercedes much this is a great tool to have. The quality is exceptional for the price. It will reset to measure in both inches and millimeters. A Must Have for Ajusting Diesel Fuel Injectors 190D 200D 220D 240D 300D 300CD 300TD 300SD
SLS low pressure hose from bottom of reservoir tank to the engine driven pump. Includes 1 meter of heavy duty fuel hose that holds up better to the hydraulic fuel than the old style original braided hose.
Hard to find rubber shaft boots that fit right under the wiper arm. Genuine Mercedes part. These are often torn or cracked. Two per car. Fits all models 126 sedans from 1981 to 1991.
When changing a front door seal on one of the above chassis you most likely will ending up need new attachments clips (along front edge of door). The majority of the old clips will break when you try to remove them.
Fits 114 115 116 123 and 126 Chassis. This set of detailed PDF instructions and plastic insertion tools with help you remove and install the front and rear door seals in your older Mercedes sedan or wagon.
Applies to all 110 115 116 123 126 201 124 140 diesels from 1961 to 1994. From my many years of working professionally on Mercedes diesels I have learned fuel injectors are the single most neglected maintenance item. I believe there are a number of reasons for this.
Fits 116, 123 and 126 chassis diesel 1977 to 1985 only. We have been sourcing these copper washers from Mercedes Benz and also including o-rings for a long time with our fuel filter kits, due to the fact that they do not come with the fuel filters.
Have you ever wished you could get your hands on a manual that would answer all your diesel complaint questions?
If you have any Mercedes model with hydraulic self leveling suspension from the early 70's up to the early 1990's this is the correct fluid to use. High quality Meyle or Febi Bilstein product. Any other type of fluid can damage the seals and score your pump.
Fits the Following: Late 126 201 124 chassis, Gasoline Models only! 1982-1983 380SEC, 1984-1985 380SE, 1984-1985 500SEL, 1987-1993 190E 2.6, 1986 to 1989 300E, 1990 -1993 300E 4matic, 1990-1992 300CE, 1988-1991 300SEL, 1992-1993 400E, 1986-1991 420SEL, 1986-1991 560SEL / SEC.
Almost all Mercedes gas and diesel engines from the late 50's up to the early '90s used pressed in steel pins to hold the timing chain guide rails in position (inside the engine block).
This kit will work on all 115, 116, 123 and 126 chassis diesels from 1969 to 1987. Almost every old Mercedes diesel I see needs to have the motor mounts changed. If you have a mechanic do it for you it will cost an arm and a leg.
Fits the following: All 116 123 and 126 Chassis Diesels from 1977-1985. This is a brand new Genuine Mercedes Steering lock vacuum valve that is located on the back of your ignition lock assembly.
IMPORTANT NOTE: We do not sell replacement antenna masts by year and model. We have run across too many problems with confusion, interchangeability, and previously swapped antennas. We sell a SMOOTH TAIL mast and a TOOTH TAIL mast.
Brand new Diesel intake valve guide, size standard 14 x 10 x 60 mm, made by TRW. Fits pretty much all 4 and 5 cylinder diesel engines up to designation 617.952. We have quite a few, so if you need more than one just change the quantity in the shopping cart!
Want to fix a common leak? If you own a 617 turbo diesel Mercedes I suspect you have already had to deal with oil leaks. It comes with old diesel territory. There is one small common leak on these engines that is annoying at best but a real pain to repair.
Here is a critical little o-ring that is hard to find and hardly ever gets replaced. We recommend these get replaced every 3 or 4 oil changes.
Includes Kent's four detailed videos on every aspect of this job! This is now becoming one of the most common oil leaks in 1968 to 1985 diesel engines. Let's face it.
If your 60x diesel engine has more than 150,000 miles you might want to consider changing the time chain. If that critical chain breaks at high speed it could destroy your engine.
If your 103 engine makes ticking noises when you first start it up and that noise comes and goes it may be due to one or more failed hydraulic valve lifters.
When replacing your 103 engine timing chain it is also important to replace the chain tensioner.
Don't lose your high mileage (above 150,000 miles) 103 engine due to a failed timing chain. If this chain breaks at high speed it can destroy the engine.
New valve cover gasket. Common source of engine oil leaks. Must be replaced any time you remove the valve cover. Fits all 103 engines 1986 to 1993. No instructions included.
If you are experiencing high oil consumption and excessive engine smoke with your 6 cylinder 190E or 300E (CE and TE) or 126 300SE / L with the single cam 103 engine this is most likely what you need to fix the problem.
Good used working EGR valve. HARD TO FIND. The valve opens and closes properly and holds a strong vacuum but shows a very, very slow leak when testing with a hand pump.
Good used turbo charger center section oil system outlet drain pipe tube as shown. This only fits the Garret T3 Turbo. Will not fit the KKK turbos. Will not fit 1985 models with trap oxidizer.
This is that little vacuum valve that always gets it nipples broken off... It is located right behind your thermostat housing on the 1981 to 1985 turbo diesel engines. It controls vacuum going to your EGR valve.
Cigar shaped return fuel hose from top of factory filter to return hard line. Fits all 300SD TURBO diesels from 1978 to 1985. Also fits 115 300D 5 cylinder 1975 to 1976 (but not 4 cylinder). 327 mm in length. Check to see if yours is cracked today!
2007-12-05ALERT! Before you replace your suspected failing brake booster you might want to change the o-ring seal between the master cylinder and booster first.
Factory fuel hose that goes from the fuel tank strainer to the metal feed pipe just above your rear axle. Fits all 116 diesel 300SD, and 123 240D 300D and 300CD and all 126 chassis diesels 300SD 300SDL 350SD/L.
If you need everything for your front hub, then this is the best deal. This kit is for BOTH sides. Comes with inner and outer wheel bearings, seal, cap, ground clip, and a tube of FREE HIGH PERFORMANCE synthetic wheel bearing grease.
New front INNER wheel bearing with race for one side only. Fits right or left side on 116, 123 and 126 chassis, 240D 300D 300TD 300CD 300SD from 1977 to 1984. PLEASE NOTE: WILL NOT FIT MODELS WITH ABS.
Fits 116 123 126 4 and 5 cylinder non turbo and turbo engines 1977 to 1985. Good used set of five special factory stretch bolts that hold the rocker arm towers to the cylinder head. Common damaged item and hard to find new. The 5 bolts here will work with 5 cylinder engines.
Long drive pin punches are very handy when working on your Benz. The smaller size in this set is particularly helpful when removing and replacing twin pin style brake pads. All steel. Made in India. Pin sizes: 1/8'', 3/16'', 1/4'', 5/16'' and 3/8''
New front outer wheel bearing with race for one side only. Fits right or left side on 116, 123 and 126 chassis, 240D 300D 300TD 300CD 300SD from 1977 to 1984. PLEASE NOTE: WILL NOT FIT MODELS WITH ABS.
Fits ALL 201 124 and Late 126 Gasoline models with the 6 cylinder 103 Engine. Here is a brand new oil pan plug with copper washer.
Good used right-side power mirror switch. Fits in center console shift cover and this fits later model 123 chassis 1982-1985 and Early 126 1981-1985.
Good complete set of star head silver bolts for 617 5 cylinder turbo diesel engines from 1978-1985. These should be replaced with new or good used if your engine has overheated enough to blow a head gasket. A special socket is required. See related products below:
Good used interior black plastic lock knob, common on most models in the 1970s and 1980s. This has good plastic and good threads. Sold as a single unit, if you need more, just change the quantity at checkout.
Fits ALL 123 240D 300D 300CD 300TD Diesels from 1977-1985, and ALL 116 and 126 300SD Diesel from 1978-1985. Here is a brand new Genuine OEM Alternator mounting bracket with new adjustment nut.
Good used front crank bolt 3 spring washers. Sorry we do not have any bolts.
PLEASE READ CAREFULLY BEFORE ORDERING!
Brand new Genuine OEM turbo diesel kickdown switch. Fits 123 turbos from 1982-1985 and 126 turbos from 1981-1985. This switch is located under your accelerator pedal, and it tells the transmission when to down shift. If the switch breaks it can stick in or on!
This is a brand new Elring seal and gasket installation kit for the 617 Turbo diesel turbo charger. Fits 116 Chassis 300SD from 1978-1980, 123 Chassis 300DT and 300TDT from 1981-1985 and 126 chassis from 1981-1985.
Here is a brand new set of Rear brake hoses for all 123 chassis 1977-1985 and 126 chassis 1981-1991, both gasoline and diesel models and 116 Chassis 300SD only, and 1973 to 1980 450SL. Also fits 380SL from 1981 to 1985 -- US MODELS ONLY
Here is a brand new set of Front brake hoses that fit all 123 chassis from 1981-1985 and 126 chassis from 1981-1991, both gasoline and diesel models.
_______________________________________________________________________________
Brand new Contitech Serpentine belt for 300CE 300SE 300SEL 300TE 190E from 1990-1993 with 104 engine. There are some vin splits on the end year, so any questions EMAIL with vin number before ordering.
SKU:GEG-COMSTB