Recently Added Products

Displaying 651 - 700 of 1909
On Demand Video
$14.99

K-jet Warm Up Regulator Modification: External Pressure Adjustment - On Demand Video

Kent will demonstrate how to drill and tap the cold start adjustment pin so you can adjust it without having to take WUR apart again and again.

This xx minute video will take you step by step through the process of modifying your warm up regulator so you will be able to easily make adjustments to your cold start control pressure.

$79.95

Bosch D-Jectronic Fuel Injector Testing and Cleaning PARTIAL Kit

For 1970 to 1975, electronic fuel injectors. A pressure tank is required. See notes below. Full kit is available if desired.

With the required pressure tank you will be able to individually test and clean our D-jet fuel injectors. Along with a 12-volt power source, you will need I gallon of cleaning fluid as described in the instructions.

$24.80

20 Piece Interior Light Bulb Replacement Kit

For most Mercedes from the Mid 1970s to the Early 1990s

Assortment of new interior bulbs as shown. These light up your dash, center console, glove box and shifter ( on some models).

Assortment includes the following:

$28.75

K-jetronic Warm Up Regulator Cold Start Modification Kit w/ Video Instructions

A good mod to make if you are rebuilding your WUR. Will allow you to adjust cold start pressure up or down without having to take the unit apart repeatedly.

Before you make this modification you should be very familiar with the function of the WUR and how its pressure adjustements affect the performance of the K-Jetronic fuel injection systems. The tools and supplies offered in this kit will allow you to modify your warm up regulator at home and it y

Sale
$120.00

OM617 Turbo Diesel Intake and Exhaust Valve Set w/ Extras - USED

For 1978 to 1985 300SD and 1981 to 1985 TURBO 300D, 300CD and 300TD

Good used set of valves for OM617 turbo cylinder heat. Includes all parts as shown (valves, springs, rotators, and spring caps. 10 THIN adjusting nuts INCLUDED. No valve cap nuts. Only parts shown in the picture are the actual items you will receive.

$6.80

Fuel Tank Screen Seal 0-Ring Genuine O.E.

Fits most fuel tank filter screens from 1973 to 1995 All W116 R107 W126 W123 W124 and W201

New Mercedes o-ring as shown. Always replace this seal when removeing and cleaning your fuel tank strainer ( screen ).

$496.00
Currently out of stock.

1986 to 1991 420SEL 560SL, 560SEL, 560SEC Fuel Injector Replacement Kit

Includes GENUINE Bosch fuel injectors, new injector holders, new seals, new evaporator air hoses, cleaning supplies, and video instructions.

PLEASE NOTE: Possible shipping delay. This is a special order item and may take up to 7 days before we can ship it!

On Demand Video
$22.99

How to Install New Fuel Injectors in a 450 M117 Engine - ON DEMAND VIDEO

For 1976 to 1980 450SL 450SLC 450SE 450SEL from 1976 to 1980 with CIS fuel injection

This 25 minute video will instruct you on how to replace the fuel injectors in your 1976 to 1980 8-cylinder M117 engine safely and efficiently.  This is a fairly straightforward job, but there are some pitfalls you will want to avoid.

$234.50

1976 to 1980 450SL 450SE 450SEL Fuel Injector Replacement Kit

Includes GENUINE Bosch fuel injectors, new holder seals, cleaning supplies, and video instructions. ( Plastic injector holders no longer included NLA )

PLEASE READ BEFORE ORDERING:  The plastic injector holders are no longer availabe. The video instructions will show we include them in the kit so PLEASE disregard. You will have to use your old holders and install the new green seals we include.

On Demand Video
$29.99

How to Install New Fuel Injectors on a 1981 to 1991 V8 Engine - ON DEMAND VIDEO

For 380SEC, 380SL, 380SLC, 380 SE, 380SEL, 500SEL, 420SEL, 560SEL, 560SEC and 560SL from 1981 to 1985 with CIS fuel injection

This 33 minute video will instruct you on how to replace the fuel injectors in your 8-cylinder M116 engine safely and efficiently.  This is a fairly straightforward job, but there are some pitfalls you will want to avoid.

On Demand Video
$19.99

How to Install New Fuel Injectors in an M110 Engine - ON DEMAND VIDEO

For 280SE, 280SEL, 280SL. 280E, 280CE, 280TE 1976 to 1985 with CIS fuel injection

This 16-minute video will instruct you on how to replace the fuel injectors in your 6 cylinder M110 safely and efficiently. Since this is a fairly straight forward remove and replace this is not a step-by-step video.

$198.75

1977 to 1983 280E 280CE 280TE 280SE 280SL Fuel Injector Replacement Kit

For the M110 6-cylinder engine. GENUINE Bosch fuel Injectors, holders, and seals with free cleaning supplies and free video instructions

This is every thing you need along with free video instructions by Kent Bergsma. Why change the K-jet fuel injectors in your M110 engine. One thing is they are very old. Second this is right now they are readily available and resonably inexpensive.

$39.00

M116 380 Engine Crossover Fuel Evap Air Hose

Fits 1981 to 1985 380SL 380SE 380SEL and 380SEC

380 engines tend to run hot. As long as it is not too hot it won't hurt the engine but that extra heat is not kind to rubber and plastic parts. 

$9.75

Custom 17mm Crowfoot Wrench for Bosch Hand Primer Pump

This is the bench to safely remove and install this style of hand primer pump. It will not damage the aluminum housing nut.

We modify this wrench right here in our shop. If a picture is worth a thousand words, what is a video work. Watch the following for a full explanation.

$298.00

1981 to 1985 380SL 380SEC, 380SE, 380SEL Fuel Injector Replacement Kit

Includes new GENUINE Bosch fuel injectors, new injector holders, new seals, and new evaporator air hoses, cleaning supplies and full detailed video instructions

Why change K-jet injectors when "they are working?"  Why change shocks when they feel ike "they are working." The deteration is very slow over time and you may not notice the difference in how the engine starts, runs, accelerates, and delivers mileage until you do this service!

$22.80

1981 to 1991 M116 M117 V8 Updated Fuel Injector Sleeve Seals - Full Set

Fits V8 engines 380, 500, 420, 560 with Bosch C.I.S. Fuel Injection with fume vapor holders as shown below

Upgraded top seals for better and longer-lasting sealing properties and well as standard green seals for the bottom of the injector holder. With these seals you can clean and reuse your existing fuel injector holders / sleeves.

$62.00

1981 to 1985 5 Cylinder Turbo Diesel Pre-chamber - USED

LARGE hole design ( see picture below ) For W123 Turbo 300D, 300CD, 300TD and W126 300SD

Damage to these is becomming more common as they engines age. If your fuel injectors are not firing fuel properly the ends of the prechambers cac burn right off causing all sorts of "weird" engine performance problems. 

$98.00

1977 to 1985 W116 R107 W123 and W126 Electric Auxiliary Fan

Replace that noisy annoying fan with new! For 450SEL, 450SL, 450SLC, 300SD, 380SEL, 380SL, 380SLC, 240D, 300D, 300CD, 300TD, 280E and 280CE

This is a high-quality ACM aftermarket part. The fan runs smooth and air movement is very strong.

$3.75

1972 to 1991 Windshield Washer Fluid Tank Filter Upgrade Kit

Works on almost all models with electric pumps

Contamintion in the window washer fluid tank is one of the main reasons the spray nozzles get plugged up.  Install this little fitler somewhere in the line between the pump and the nozzles on the hood and secure with zip ties.

On Demand Video
$9.99

1962 to 1980 Power Sunroof Cable Transmission Drive Unit Service and Repair - On Demand Video

Part 2 of my Early Broken Sunroof Series - a multi-part series to repair broken power sunroofs from 1962 to 1980 all models. This covers theory of operation - complete service and repair and installation tips of the drive unit.

The sunroof transmission drive unit moves the cable back and forth to open and close the sunroof. There are 5 gears inside this unit that transfer the incoming drive from the motor ( high speed) to the final drive moving the cable (slow speed).

On Demand Video
$14.99

1962 to 1980 Stuck Non-Tilting Sunroof Removal and Inspection - On Demand Video

Part 1 of Early Broken Sunroof Series - a multi-part series to repair broken power sunroofs from 1962 to 1980 all models

In part one Kent will show you how to get all the sunroof parts off our old Mercedes and on a bench particularly if you sunroof is broken and not moving.  In this 21 minute instructional video here is a list of the subjects he covers:

$72.00

1964 to 1972 6 Cylinder Gas Engine Front Flex Disc

Fits 230 230SL 250S 250SE 250SL 280S 280SE 280SEL 280SL

This is a critical replacement part. If it lets loose at high speed it can damage your transmission and drive line. Just replace if over 20 years old! Bolts not included. Plan to use your old ones. 

On Demand Video
$8.99

Single Wire O2 Sensor Installation Instructions - On Demand Video

For 1980 to 1985 gas 6 and 8 cylinder models with oxygen sensor installed.

Is your old gas engine running a little rough? There could be lots of reasons for this but if you have good compression, good plugs and wires you might consider replacing your O2 sensor even if your warning light is not showing up. This is an easy DIY job.

$29.85

1981 to 1985 6 and 8 Cylinder Single Wire O2 Sensor Installation Kit

Fits 280E 280CE 380SL 380SEC 380SE 380SEL 500SL 500SEL with oxygen sensor installed

This is a part that hardly ever gets changed, and it is an easy DIY job if you can access it under your Benz. Make sure your model fits those described and has an O2 sensor installed. You can confirm that by the existence of an o2 sensor warning light on your dash.

$88.00

380 420 500 560 V8 Fan Clutch Replacement Kit

Watch the engine temp. If it likes to creep up especially at idle it could be a worn out clutch. Watch the video below for more explanation.

This fits all Mercedes V8 engines listed in the title from 1981 to 1991 including the sedans, the SL and SEC models. I compare fan clutches to shock absorbers. They wear out slowly over time and you don't feel or see the difference until you actually replace it with new. 

On Demand Video
$12.99

380 560 V8 Fan Clutch Replacement Instructions - On Demand Video

For 380SL 380SE 560SL and 560SEL

In this 13 minute instructional video Kent will demonstrate how to remove an old fan clutch and replace it with a new one on a 1983 380SL This is a beginner D.I.Y. job and no special tools are required. This video is included free of charge with the purchase of our Later V8 fan clutch kit.

$6.80

W114 W115 W116 W123 Front Seat Attachment Bolt Set (8)

Replace those old corroded bolts with heavy duty zinc plated new bolts.

These are very high quality bolts. Same 8mm thread and small 10mm head as the originals. 8 is enough for two front seats.

This is a sample of the nut plate they go into on the back attach point on the W123 front seats.

On Demand Video
$2.99

How to Install Our Injector Pressure Tester Conversion Kit

Shows how to upgrade your Version 1 or Version 2 tester to our Version 3 with fume capture bottle.

This video only applies to our injector pressure tester. Kent will show you how to attach the capture bottle and fittings to your older Version 1 or Version 2 pressure tester. Video is free with purchase of the conversion kit.

$189.50

1972 to 1991 Most Models New COATED Rear Brake Brake Caliper Set

Amazing aftermarket quality - why rebuilt when you can buy. new! Complete with PERFORMANCE CERAMIC brake pads and FREE extras. - PDF brake repair manual included FREE of charge.

Fits chassis models W114 W115 W116 R107(except 500SL and 560SL)W123 (do NOT FIT WAGONS) and W126 ( except 500 series 500SEL, 560SEL, 560SEC) from 1972 to 1991.

$72.00

W116 and W123 Full Set of Seat Adjustment Replacement Handles

Made in the U.S.A. in our shop. Designed by Kent to be stronger and with a more comfortable grip.

You can purchase these individually, but you might want to consider replacing all four at the same time. If one is broken others are not far behind. Watch Kent's video below to see what happened to him and why he decided to manufacture these himself. 

$18.50

Modified 22mm Open End Wrench for Oil Cooler Fittings

Helps to prevent damage to valuable oil cooler. See video below. Also multi-purpose uses.

This custom-made thin head wrench by Kent Bergsma can save the day and your pocketbook.  It is very important that you hold the fitting base on the oil cooler when removing the oil cooler hoses. A regular 22mm wrench is almost always too thick and can also cause damage.

On Demand Video
$19.99

How to Install New Steering Tie Rod Ball Joint Ends - On Demand Video

Here are the instructions you need to do it right and you can do it yourself!

In this detailed 30-minute video Kent will walk you through the process of installing new tie rod ends on his 1959 Mercedes 220SE. The principles are the same on almost all models from the 1950s up to the 1990s. He will explain the differences in adjustment between the older and newer styles

$85.00

1958 to 1991 Full Tie Rod End Replacement Kit w/ Video Instructions

Fits most model passenger cars. Ponton, Fintail, Coupes, SLs, W108 109, R107, W116, W114, W115,W123 and W126. Does NOT fit the W201 or W124 chassis

Loose steering or wheels shaking at speed. This can often be worn out tie rod ball joints. The joints can be replaced as a DIY project. Watch the video below to see if this is something you want to take on yourself.

This kit includes:

$75.00

W108 W109 Sedan RIGHT Rear Chrome License Plate Light Assembly - USED

No dents. Excellent chrome. You will need your wiring, light bulb, and hold-down nuts.

This is a good passenger side right license plate lights as shown. The chrome is very bright. The light bulb holder and lense are in good condtion.  Email us if you need the wiring harness.

 

 

$5.80

8mm ( 5/16 inch ) Fuel Hose End Pugs x 4

Use when disconnecting a fuel hose to prevent spillage on your engine or floor!

You would be amazed at how much fuel can leak out of a fuel hose when you disconnect it from your tank or engine. This is an easy way to prevent messy spills.

$4.75

All Models Radiator Hose Chafe Protector - Heavy Duty

Don't let a hose rub up against the engine or radiator. Easy install with zip ties included if needed.

This is a great solution to what is sometimes a nagging problem. This heavy duty and flexible and adjustable plastic spacer can be put on the top or bottom radiator to prevent chafing in and area where it might come in contact the the engine or the radiator.

$96.50

1977 to 1985 Diesel Engine Critical Coolant Service Kit

So often neglected - yet critical to preventing pre-mature or catastrophic engine failure!

Why is this so important? It is primarily due to the age of these cars now and the fact that lurking problems can be hidden from visual inspection. There is not ONE diesel that Kent has looked at in the last five years that does not need this service! Even ones with under 150,000 original miles.

$185.00

W110 200D OM621 Diesel Engine Vacuum Pump - USED

Good working condition. Internally inspected. See pictures below

Kent opened this up to make sure the diaphragm was in good condtion. Check valves appear to be almost new with no oil contamination, so we suspect this is a low time pump or had a kit installed when they were available. 

On Demand Video
$28.99

1978 to 1985 Diesel VCV ( Vacuum Control Valve ) Internal Inspection and Service Instructions - On Demand Video

Warning: Not all VCV valves are repairable. Some are just too worn out and no parts are available. But it is worth a "shot."

Kent delivers a very detailed 24 minute video on understanding how this valve works and how to fix it if possible. You will learn how to recognize a valve that is just too worn out to repair. No bleeder valve repair parts are available and there is not way to DIY fix one if it is badly damaged.

$39.50

1978 to 1985 Diesel VCV ( Vacuum Control Valve ) Internal Inspection and Service Kit

We can not call this a rebuild kit because not all VCV valves are repairable. Comes with 3 detailed On-demand videos to remove, test, and service!

The VCV valve controls the critical shifting patterns of most diesel automatic transmissions from 1978 to 1985. This includes the 1978 to 1985 300SD, the 1980 to 1985 W123 300D, 300CD and 300TD and the 1980 to 1983 240D.

$39.75

1972 to 1987 Bosch Long Diesel Fuel Injector Critical Replacement Parts - Used

Other than the nozzle itself, these are the critical parts that wear out internally and can cause leaks and misfiring.

When “rebuilding” an old Bosch mechanical fuel injector, replacing the nozzle is usually enough get it working again at peak performance. But sometimes you will run into a fuel injector that just won't fire right nor product a correct fan spray pattern.

Pages