Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
Written in multiple languages including English. Images include reference numbers to easily find the factory part numbers listed. If you have one of these old Mercedes with a 189 engine this is a must-have reference manual.
This old rare manual is like new. Probably never been used. Just a library piece from an old collector. Spotless inside. This has a lot of good information not covered in the 190 Service Manual for the specific models listed in the title. Approximately one and one-quarter inch thick.
If your 560SL key starts to stick, is stuck, and won't turn, or you have lost your key this is your solution. In the first two situations, your lock is probably worn out, and trying to change out the tumbler will not solve the problem.
Please note that this video class is included free with the purchase of one of our remaining new 450SL or 380SL steering lock assemblies.
Please note that this video class is included free with the purchase of one of our steering lock repair services or a new or rebuilt steering lock assembly. Please see related products below.
Lockservice
This was removed from a vehicle and was tested. ONLY ONE KEY but it is the low-security key so easy to get a duplicate made. Very good key movement, good working electrical switch, and door buzzer switch mounted. Fits Early 107 and later W116 chassis only ( see list in title )
In this 14 minute instructional video, Kent will show you how to safely remove the side window lower trim without damaging the car's paint or the soft aluminum trim. He will do this using his special tool to do this job. He will also show you how to install the trim back on without bending it.
This can be one of the hardest trim pieces to remove if you don't want to damage the car's paint or the aluminum trim itself. When working on detailing his 300TD wagon, Kent finally decided it was time to make a special tool for this operation.
Very hard to find with the pull tab intact for the chrome inside handle. Most are broken off. If this mechanism is all corroded you may not even get your hatch open. This one came out of a very clean wagon with no corrosion and the mechanism operates smoothly. Chrome handle not included.
This video ONLY covers some of Kent's "tips and tricks" on installing a harmonic balancer back onto the front of the crankshaft on an old Mercedes engine. The specific procedure was filmed while doing a front crank seal replacement on a 1983 240D.
There are a number of things that can go wrong with a W123 instrument cluster.
In the video instruction, Kent will show you the step-by-step procedure on how to safely remove the instrument cluster from the dash. It will require our special dash pull tools that can be purchased separately.
We starting using some of these to plug brake lines while changing out calipers. Then we started using them on fuel and oil hoses. Now we are using them all over the place and keep finding new uses for them on a monthly basis. These are a MUST HAVE! Watch the video below to become a believer!
On the average W116 300SD nine out of ten times we find these mounts rotten, soft, or collapsed. It is often just due to the age of the rubber. Have you noticed your engine is shaking more at idle? Maybe you are noticing new vibrations that were not there before.
After years of wearing out his shoulder and elbow joints trying to hand polish convertible top windows, Kent finally decided he had to use some fast-action power tool. The idea for this kit and the included tool came from developing and using his aluminum trim polish kit.
Kent modified this puller and developed a procedure to remove the front crank seal race so the job could be affordable from the DIY mechanic. This costs less than half the cost of the factory tool.
Valve clearance adjustment should be done every 10,000 to 12,000 miles. Recently emails started coming in - "we can not find any valve adjustment tools for our earlyV8 - help!" Most companies are currently noting the old factory-style tools are no longer being manufactured, so we went to work to
In this 16-minute instructional video, Kent will explain some of the challenges and problems you may have to deal with when changing your instrument cluster bulbs by not removing the cluster.
Original printing. These have been in storage for over 50 years. One super thick manual covers all 190 pontons including sedans. The supplement manual covers 190SL and mostly focuses on the carbs. The original owner wrote his name on inside top of the first page.
Factory owners manuals set as shown. 300SD handbook proper is in excellent condition. Others are average to above average.
To view all of Kent's Mercede
This is the newest LED light bulb Kent has found and tested that you can install on the backside of your instrument cluster to increase your instrument lighting on your older Mercedes. These particular bulbs will be much brighter with a VERY RED cast light and they don't get hot!
Cad plating can be expensive but is great for show restorations. If you just want to make those parts on your old Benz look good then this is the closest paint Kent has found to looking like cadmium gold plating. Check out the pictures below of the fuel delivery brackets he did with this paint.
Did you hear these are not available? No part number anywhere? Well, as the source we went to work and made it happen. You can now purchase the correct copper sealing rings for your OM616 and OM617 injection pump delivery valves.
Here is my all-time favorite gasket maker and sealant. You may already know how I feel about RTV silicone products (I think they should be outlawed!). We have had a number of our customers ask us where to get this so we decided to offer it on our website.
This is a quality aftermarket part and an excellent alternative to a used one. New O.E. is no longer available.
This is a quality aftermarket part and an excellent alternative to a used one. New O.E. are no longer available.
To many people, automotive electrical systems and testing are a big mystery. It is not as complicated as you might think.
These are the best wires you can get for your 1981 to 1985 380SL 380SLC 380SE 380SEL 380SEC and 500SEL. The coil wire is included. Consider replacing your cap, rotor, and CORRECT spark plugs at the same time. See related products below:
In this video, Kent will show you how he fixed his leaking tires on his chrome alloy wheels by using Miracle Paint. This is a full 22-minute step-by-step instructional video. Watch the video "trailer" below to give you a better understanding of what is involved in this procedure.
This kit was developed by Kent primarily to fix leaking chrome wheels. The free on-demand video that comes with this kit shows the detailed process of cleaning and filling the corroded areas along the edges of the inside of the wheel to seal them and stop annoying tire leaks.
Do not let anyone convince you to install some super platinum, iridium or kryptonite spark plug in your old Benz. They are just not capable of handling the richer fuel mixtures associated with these older engines.
Do not let anyone convince you to install some super platinum, iridium or kryptonite spark plug in your old Benz. They are just not capable of handling the richer fuel mixtures associated with these older engines.
Most 1988 to 1993 6 cylinder CIS fuel injection delivery (FID) systems are old and tired and have not been properly maintained. These include the W201 190E 2.6, the W124 260E 300E, 300CE, 300TE, the W126 300SE, and 300SEL, and the R129 300SL.
In this 19 minute instructional video, Kent takes an old 1970 280SE engine in the back of his shop and pulls the harmonic balancer off the front of the engine, removes the old seal, uses his custom-built puller to remove to seal race, and then shows you how to use the tools in his seal replacemen
When changing the front crank seal on your older 6 cylinder Mercedes you may or may not need to replace the sealing race that goes on over the front of the crankshaft.
Restore that original ride back onto your old W110, W111, W113 or W108. Nothing like a new set of Bilstein shock absorbers. These are the best.
Unless the engine has been overhauled most of these old 6 cylinder gas engines of the '60s and very early '70s are running around with their original front crank seal. Take a look under your car if you have one - I bet it will look a lot like the engine in the video below.
We are not kidding when we say to get them while you can. Genuine Mercedes replacements are now at $500. When you see prices go up like this you know that supply may be dwindling.
The original screws in these pumps get pretty nasty looking over time. When you try to clean them will a wire wheel the plating will be completely removed and the heads will rust again pretty quickly. Now you can install new original looking yellow zink plated screws and washers.
When doing a compression test you must properly seal the inner surface of the pre-chamber with the fuel injector hole adapter. Copper washers work the best for this to ensure a 100 percent seal. Do not use the engine's heat shield washers.
Kent has found and tested this newest LED light bulb that you can install on the backside of your instrument cluster to increase your instrument lighting on your older Mercedes. These particular bulbs will be much brighter with a more AMBER cast light, and they don't get hot!
This is the newest LED light bulb Kent has found and tested that you can install on the backside of your instrument cluster to increase your instrument lighting on your older Mercedes. These particular bulbs will be much brighter with a white light and they don't get hot!
This 25-minute video is a supplement to Kent's other instructions on replacing diesel engine front crank seals. It is offered free of charge with one of the seal replacement kits.
If you have ever changed the fluid in a 4matic transfer case you will understand why Kent is so excited about his new custom pressure bottle.
There seems to always be a better way to do it.
In this video Kent will share some set up tips as well as explain what is in the compression tester and an overview of how it is used.
This video will show you how to remove the front crank seal race using the factory tool and using Kent's custom puller. It will also demonstrate a very easy way to install a new replacement race before installing a new seal.
LOOK closely. What you see is what you get. No glass. Plan for parts only.
When you see how clean these are you realize they were not mounted on a car very long. This is a set of right and left frames with good reflectors. Will need cleaning and polishing, bulbs and glass lenses to complete.