Over the years Kent has used a number of different things to place on top his jack stands to prevent damage and for added security. He has even tried some of the commercially available jack stand plastic covers. Nothing has proven to work better than the special cut reinforced hose shown here.
Search | W123 | Suspension
This is the best one Kent has ever used and he has tried quiet a few kneeling "aids". With 6 wheels this one is strong enough not to break in the middle. In indents with the knee foam are very comfortable.
Have you ever tried to mask off your tires with paper and tape before painting the wheels? If you have I am sure you are laughing right now. Doesn't work too hot...Hard to get any tape to stick to the rubber tire.
Good used leveling valve and bracket as shown. This one is one of the better ones we have seen. It is super clean inside with hardly no scratches. There are a few corrosion spots on the outside but are only cosmetic. This is a picture of the actual part you will receive.
If you drive hard and do a lot of heavy breaking your front wheel bearings should be packed with this grease! Also good for chassis, suspension, cv and universal joints. Made by Valvoline.
This green colored grease is specially formulated to work on any Mercedes from wheel bearing. Comes in a tube that is enough to do two front wheel bearings and inside hubs. If you drive at high speeds this is your best grease to prevent bearings from overheating.
Good used high pressure hose that resides in engine compartment.
Rear suspension SLS hydraulic fluid reservoir tank as shown. Complete with filter assembly and measuring cap. Includes good mounting strap as shown. Fits 1985 123 Chassis 300TD wagons with reservoir located behind the driver side headlight assembly (engines with trap oxidizer).
This quick reference guide will help you locate the source of the most common problems found on 123 and 126 chassis front suspensions. Illustrated parts breakdowns will guide you to the parts needed to repair the problem.
Front suspension overhaul is almost always left until one has fixed everything else on the car. We know that most owners can live with some looseness in the suspension, especially when you consider the age of the 123 chassis.
We are so impressed with the quality and performance of Meyle that we are going to offer our customers their new line of shock absorbers. This complete set of front shocks comes with all hardware, front dust covers, and full instructions.
We are so impressed with the quality and performance of Meyle that we are going to offer our customers their shock absorbers at this special price. This full set of front and rear shocks comes with all hardware, front dust covers, and full instructions.
FITS THE FOLLOWING all 123 chassis from 1977-1985 which include the 230, 240D, 240TD, 280E, 280CE, 300D, 300CD and 300TD. The best way to upgrade the original ride and feel of your Mercedes is to replace your shocks with new HEAVY DUTY Bilsteins.
FITS THE FOLLOWING all 123 chassis from 1977-1985 which include the 230, 240D, 240TD, 280E, 280CE, 300D, 300CD and 300TD.
ALERT: This is a very common front end wear part that can cause uneven tire wear and sloppy steering! Quality New Aftermarket left (drivers) side upper control arm.
Fits the Following: All 123 and 126 Chassis from 1977 to 1991 .
This 16 page PDF downloadable SLS manual was written specifically for 123 300TD wagon owners, but also applies to the models mentioned above, 300TDs from 1979-1985 and other chassis above up to 1990.
This is a very common wear problem on most older Mercedes. The steering idler arm bushings are made out of rubber and when they wear your steering will get sloppy and you may hear squeaking noises when you turn the steering wheel.
Kit contains right and left tie rod assemblies as shown. We have found if you discover one or more loose tie rod ball joints, it is always better to replace both rod assemblies at the same time. Entire assemblies are about the same price as two individual ball joints.
These will fit all Mercedes from the mid 1960's to the mid 1980's: W108 W109 W113 W111 W116 R107 W114 W115 W123 Early W126
The picture shows wheels with tires, but the tires have been removed to reduce shipping costs. You will only receive the two wheels as shown without tires. These take the standard short Mercedes lug bolt but lug bolts are not included.
This is a MUST HAVE wheel care kit EVEN if you don’t work on your own Mercedes. This is one thing you must learn how to do because you can not trust tire shops anymore. See some videos below and I will explain why I feel so strongly about this.
In this video, Kent explains the correct procedure for cleaning and lubricating your hubs and rear brake rotor BEFORE you install your wheels. He hardly ever sees this done when removing wheels on 15 plus-year-old Mercedes so he knows it is almost ALWAYS neglected.
This is probably the 12th most neglected maintenance it. In all the years of working on Mercedes, Kent has only seen this service previously done on 2 or 3 cars. Watch Kent's YouTube video below and he will explain the two benefits to doing this procedure on your own Mercedes.
PLEASE NOTE: These are not complete instructions on how to open up an early style SLS pump and properly reseal it. Rather, these are some tips that will make the job go faster and easier. These are things Kent has learned rebuilding a number of these pumps himself.
I do not need to say much about this tool. Well made and well thought out. Someone who obviously was frustrated at scratching the finish on his or her alloy wheels came up with this idea. Watch the video below to see why this is now my favorite go it 17 mm lug bolt socket.
This U.S.A. made 17 mm 8 inch long combination wrench is custom modified here in our shop to help you easily install Bilstein front and rear shocks on most of the older model Mercedes Benz.
In this video instruction, Kent will demonstrate how to check for one possible source of a mysterious front end clunking sound. Any clunking noise you hear when driving over rough ground or when braking should be investigated immediately.
This is the most thorough kit available anywhere in the world for opening up and resealing your early style (square ) SLS leveling valve. This was used on all W123 300TD wagons and a few other models during that same time period.
Why these special tools? Can't you just adjust that rod with a couple of combination open end wrenches. Maybe yes and no... have you tried it? You can not get the rod off with a regular thickness 10 mm open end wrench.
Kent will walk you through the steps to properly adjust the leveling according to factory specifications. He will also cover some of the problems you may run into and demonstrate how he used the new adjusting tools he designed.
In this long video manual Kent will walk you step-by-step through the process of removing the older square style leveling valve from your Mercedes, opening it up without losing the spring and balls, removing the old o-rings and cleaning the parts properly, installing the new o-rings, and putting
Trying to fix a rough or bouncy ride in your SLS Mercedes? Not sure what is causing the problem? Maybe you have heard that it might be the accumulators.
In this video Kent will walk you through the procedure of removing the old accumulators and installing new ones in a W123 300TD wagon. It is a very straightforward job that only takes a couple hours. You will need to raise the car and safely support it on jack stands.
This video will walk you through the procedure of removing the hyraulic reservoir tank and cleaning it and replacing the low pressure hose from the bottom of the tank to the SLS pump. This is the hose that most often leaks.
NOTE: UPS GROUND SHIPPING ONLY. This complete kit will help you flush the old ATF fluid out of your power steering system and replace it with new high performance power steering fluid.
If you have a 1985 or older Mercedes Benz it is time you flush that old automatic transmission fluid out of the system and replace it with a good power steering fluid. ATF formulations have changed over the past 20 years.
When replacing the front upper control arms you formost need to think about safety. You will need a good quality and large rolling hydraulic floor jack, and a couple good jack stands.
This instructional video covers the procedure for flushing the old hydraulic fluid out of an SLS system and installing new fluid. The example shown in this video is from a W126 560SEC.
Brand new rear end differential front seal. Fits both gas and diesel models. This is NOT the seal for the axles.
SINGLE AXLE KIT: This set of boots will work on ONE (1) axle of the BOLT TYPE. This will not work if you have the crimped can type axles. SEE PICTURE BELOW TO CONFIRM IF YOUR AXLE MATCHES THIS TYPE! If you order the wrong boots by mistake they are not returnable.
When replacing front shocks on the above mentioned Mercedes you must a 10 mm 12 point shock with 3/8 inch drive. If you don't have one you will in trouble.
This is a high quality thin wall socket made in Taiwan.
Every one of these pumps I have ever seen need resealing. The seals and o-rings become just too hard over all those years of use. This is the most complete SLS (self leveling suspension) pump overhaul kit on the market today.
With age and abuse rear springs can weaken and allow the rear of the vehicle to sag. NOTE: Before replacing springs you should first check the condition of the rubber center rear end mount and possibly replace the rear end subframe mounts. These are also causes of the rear end sagging.
Sorry, no international shipping on this last pump. Excellent rebuilt used pump. It has been taken apart, inspected for wear, cleaned and resealed completely with new internal o-rings, new shaft seal, and new cover o-ring.
I have been discovering this is one of those maintenance areas that suffers from severe neglect. Failure of the rubber support or center drive shaft bearing can cause all types of improperly diagnosed vibration problems - some commonly change with vehicle speed.
New inner front wheel bearing seal. Fits right or left side. Should be replaced when repacking wheels bearings with new grease. NOTE: DOES NOT work on cars with ABS brakes.
If you own a 123 wagon or other Mercedes with self leveling suspension, you will be faced someday with having to replace the main high pressure hydraulic hose that goes from the engine driven pump to a metal line fitting routed back to the rear suspension.
New Genuine OEM rear stabilizer bar bushings, sold in a set of two. Fits 123 chassis 1977 to 1985 240D 300D 300TD 300CD 280E and 280CE.
Dont neglect this service as many do! I recommend the hydraulic fluid and filter be changed every 30,000 miles. You would not believe how many SLS vehicles I have seen with dirty hydraulic fluid - I mean nasty! Sometimes I have even found engine oil in the system!