Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
New rubber stop for rear exhaust bracket. It plugs into the body right above the back of the rear muffler. Helps prevent rattle. Fits almost all models from late 1960s to mid 1990s. When you hear something clunking in the back when you go over a bump, this part is probably missing.
Brand new factory type braided cloth injector end plug for all diesels 220D 240D 300D 300CD 300TD 300SD 300SDL E300D, from 1968 to 1995. Sold individually. Check yours for cracks or leaking! Very important that the end plug be in good condition or fuel leaks will occur.
PLEASE NOTE: This item can ONLY be shipped UPS Ground. Diesel purge is amazing stuff! It is getting so popular that we have decided to offer it on the website individually, so now you can buy per can.
In working on many 61x series diesel engines, I have often found one or more of these clamps missing. Missing or loose clamps are the number one reason for injector hardline crack failure. There should be a clamp like this between every two hard lines to minimize vibration fatigue failure.
This is the diesel copper ring for your oil pan plug. Fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.
This is the Narrow style oil filler gasket found mostly on engines from the mid 1980s on. Fits all 4 and 5 cylinder diesel engines from 1978 to 1985 including the 240D 300D 300CD 300TD and 300SD. 6cm diameter and 6mm wide.
This is the wide style oil filler gasket 6cm in diameter and 10mm wide. Fits all 4 and 5 cylinder diesel engines from 1978 to 1985 including the 240D 300SD 300D 300CD and 300TD. ONLY IF YOU ENGINE HAS THE METAL CAP. If it has the plastic black cap you need the narrow style.
This oiler pipe gasket is for turbo diesels only. Fits all 5 cylinder turbo diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.
This is a brand new egr gasket. Fits all 5 cylinder turbo diesel engines ONLY from 1978 to 1985 including the 300SD 300D 300CD and 300TD.
This is a brand new thermostat housing gasket. Fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.
This is the gasket that goes in the power steering reservoir cap. Fits all 4 and 5 cylinder diesel engines from 1977 to 1985 including the 240D 300SD 300D 300CD and 300TD 300SD
This new vacuum pump gasket fits all 4 and 5 cylinder diesel engines from the mid 60's up to 1985 including the 200D, 220D, 240D, 300SD 300D 300CD and 300TD.
This new water pump housing gasket fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.
Recommend you use of non-hardening Permatex as the correct sealant for this gasket.
This new gasket is used for the injection pump. Fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.
This chain tensioner gasket is brand new and is fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.
This size freeze plug fits almost all gas and diesel engines from the early 70s up into the 90s. This includes all 61x and 60x diesel engines, the 103 gas engine in the 190E, 300SE and 300E. It also fits many V8 engines but you should measure your current plug to be sure.
New copper alloy special locking nut for intake/exhaust manifold studs. New nuts should be used when replacing your manifold gasket.
If you plan to change coolant hoses this is a must-have labor-saving tool. This is one cleverly designed tool. I could not have done it better myself. I actually use to make a couple of different types before I found this one.
Applies to all 110 115 116 123 126 201 124 140 diesels from 1961 to 1994. From my many years of working professionally on Mercedes diesels I have learned fuel injectors are the single most neglected maintenance item. I believe there are a number of reasons for this.
Have you ever wished you could get your hands on a manual that would answer all your diesel complaint questions?
Almost all Mercedes gas and diesel engines from the late 50's up to the early '90s used pressed in steel pins to hold the timing chain guide rails in position (inside the engine block).
This kit will work on all 115, 116, 123 and 126 chassis diesels from 1969 to 1987. Almost every old Mercedes diesel I see needs to have the motor mounts changed. If you have a mechanic do it for you it will cost an arm and a leg.
Brand new Diesel intake valve guide, size standard 14 x 10 x 60 mm, made by TRW. Fits pretty much all 4 and 5 cylinder diesel engines up to designation 617.952. We have quite a few, so if you need more than one just change the quantity in the shopping cart!
Cigar shaped return fuel hose from top of factory filter to return hard line. Fits all 300SD TURBO diesels from 1978 to 1985. Also fits 115 300D 5 cylinder 1975 to 1976 (but not 4 cylinder). 327 mm in length. Check to see if yours is cracked today!
Cigar shaped return fuel hose from top of factory filter to return hard line. Fits 115 220D, 240D four cylinder only and all 123 diesels from 1977 to 1985 (both 4 and 5 cylinder and turbo and non turbo. 265 mm in length. Check to see if your hose is cracked today!
Good used front crank bolt 3 spring washers. Sorry we do not have any bolts.
Fits all Diesels from 1965 to 1985
Brand new oil pan repair kit. Includes new pan, new pan gasket, and new oil drain plug. Fits 115 chassis 220D, 240D and 300D. Also fits all 123 chassis non turbo 300D diesels from 1977 to 1981, and 240D from 1977 to 1983. Gasket and drain plug included, but not shown.
In stock and ready to ship. New aftermarket fan clutch replacement for 113,111, 108 and 109 chassis gas engines from 1968 to 1973, all 114 and 115 gas and diesel, all 123 gas and diesel engines 1977 to 1983 and 1981 to 1983 126 300SD.
New OE Reinz head gasket set. Fits all 115 and 123 300D 5 cylinder non-turbo engines 1975 to 1981. Comes complete with all gaskets only as shown in the picture. Valve stem seals and valve cover gasket are NOT included.
New OE Reinz head gasket set. Fits all 240D 1974 to 1983, 4 cylinder diesel. Comes complete with all gaskets only as shown in the picture. Valve stem seals are included.
If your pan plug is worn, leaking or rounded off, dont fight it anymore! Buy a new pan plug and copper sealing ring and stop those unsightly oil drips now. This is the small 13 mm head factory pan drain bolt that came on 240D, 300D, 300CD, 300TD and 300SD from 1974 to 1985
For 200D 220D 240D 300D 300CD 300TD 300SD to 1985. This manual is written specifically for the diesel owner who wishes to know more about his engine and to understand how to tune and adjust it for maximum performance.
This "permanent" red threadlocker is probably the best that I have used. It has the best sealing cap and cures rapidly and reliably when confined between metal parts. Use it to lock threaded fasteners, nuts, bolts and screws from loosening.
For use on all*** Mercedes diesels 1959 to 1993. BUT PLEASE NOTE THERE ARE SOME LIMITATIONS ON THE LATER MODELS. Test compression on 110, 115, 116, 123, 126, 201,124 AND 140 chassis. Almost ALL models up through 1987 can be tested through the fuel injector hole.
FITS THE FOLLOWING: All 110, 115 and 123 four cylinder diesel engines. Replace that valve cover gasket every time you adjust the valves. Will keep those unsightly oil leaks around the valve cover at bay. Fits 220D and 240D.
Fits all 115 chassis. Mercedes Diesel engines from 1968 to 1976. This includes 220D, 240D and 300D. Here is a chance to pick up all those most used diesel engine service parts in one kit for one great price. These are high quality replacement and service parts.
This is now becoming one of the most common oil leaks in 1968 to 1985 diesel engines. Let's face it. These engines are getting older and the rubber seal is wearing and becoming more brittle with time.
Fits 115, 116, 123 and 126 5 cylinder diesel engines (both non-turbo and turbo) from 1975 to 1985. These should be changed every time you remove your valve cover for valve adjustment or other maintenance. Stock up now for a great price on a set of 3.
The Monark brand is no longer made. The Bosch pump is hard to find. This is the best alternative we can provide. For older models with primer pump mounted on the injection pump.
FITS THE FOLLOWING: all 115, 116, 123, and 126 chassis with 5 cylinder engines. Always replace that valve cover gasket every time you adjust the valves (every 12,000 to 15,000 miles). Will keep those unsightly oil leaks around the valve cover at bay.
Fits 110, 115 and 123 four cylinder diesel engines. These should be changed every time you remove your valve cover for valve adjustment or other maintenance. Stock up now for a good price on a set of 3.
When replacing your valve cover you may need wave washers. Look below.
Fits 115 and 123 Chassis 300D, 300CD and 300TD with 5 cylinder NON-turbo engines from 1976 up to 1981. If your 5 cylinder diesel has more than 200,000 miles on it without any major work, it most likely needs new valve stem seals.
Fits 115 and 123 Chassis 220D 240D from 1968 to 1983. If your 4 cylinder diesel has more than 200,000 miles on it without any major work, it most likely needs new valve stem seals.
FITS THE FOLLOWING: All models PON, FIN, P55, 110, 111, 112, 113, 108, 109, 114, 115, 107, 116, 123, 124, 126, and 201 chassis. Here is my all time favorite gasket maker and sealant. You may already know how I feel about RTV silicone products (I think they should be outlawed!).
Fits 115 and 123 chassis 220D and 240D to 1983. Check yours for staining around the gasket. Also check nuts for tightness. These symptoms may indicate a leak. This is an important maintenance item! I have seen bad leaks as well as completely loose intake and exhaust manifolds.
Fits W115 W116 W123 and W126 5-cylinder both turbo and non-turbo diesel engines from 1975 to 1985. Check yours for staining around the gasket. Also, check nuts for tightness. These symptoms may indicate a leak. This is an important maintenance item.
Fits 123, 126 and 116 chassis 5 cylinder diesel engines from 1977 to 1985. This valve cover is in good condition with no cracks or heavy corrosion.
Fits All 115, 116, 123, and 126 5 Cylinder Diesel engines. This kit comes with (4) brand new fan clutch bolts that we source and custom machine here in our shop.
Applies to all Mercedes: Pre 1960, 190SL, 110, 111, 112, 113, 114, 115, 108, 109, 107, 116, 123, 126 with adjustable valves. We have had a number of requests to provide our customers with a feeler gauge to adjust their valves, particularly on the 616 and 617 diesel engines.