Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
When was the last time you knocked one of your vacuum lines off around the oil filter housing, only to discover when you tried to reattached it that the fittings were swollen and would just not stay connected? This is a Y shaped fitting that fits 115, 116, 123, and 126 chassis.
This is the diesel copper ring for your oil pan plug. Fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.
This is the Narrow style oil filler gasket found mostly on engines from the mid 1980s on. Fits all 4 and 5 cylinder diesel engines from 1978 to 1985 including the 240D 300D 300CD 300TD and 300SD. 6cm diameter and 6mm wide.
This is the wide style oil filler gasket 6cm in diameter and 10mm wide. Fits all 4 and 5 cylinder diesel engines from 1978 to 1985 including the 240D 300SD 300D 300CD and 300TD. ONLY IF YOU ENGINE HAS THE METAL CAP. If it has the plastic black cap you need the narrow style.
This oiler pipe gasket is for turbo diesels only. Fits all 5 cylinder turbo diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.
This is a brand new egr gasket. Fits all 5 cylinder turbo diesel engines ONLY from 1978 to 1985 including the 300SD 300D 300CD and 300TD.
This is a brand new thermostat housing gasket. Fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.
This is the gasket that goes in the power steering reservoir cap. Fits all 4 and 5 cylinder diesel engines from 1977 to 1985 including the 240D 300SD 300D 300CD and 300TD 300SD
This new vacuum pump gasket fits all 4 and 5 cylinder diesel engines from the mid 60's up to 1985 including the 200D, 220D, 240D, 300SD 300D 300CD and 300TD.
This new water pump housing gasket fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.
Recommend you use of non-hardening Permatex as the correct sealant for this gasket.
This new gasket is used for the injection pump. Fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.
This chain tensioner gasket is brand new and is fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.
This size freeze plug fits almost all gas and diesel engines from the early 70s up into the 90s. This includes all 61x and 60x diesel engines, the 103 gas engine in the 190E, 300SE and 300E. It also fits many V8 engines but you should measure your current plug to be sure.
New copper alloy special locking nut for intake/exhaust manifold studs. New nuts should be used when replacing your manifold gasket.
If you plan to change coolant hoses this is a must-have labor-saving tool. This is one cleverly designed tool. I could not have done it better myself. I actually use to make a couple of different types before I found this one.
This removable threadlocker is probably the best that I have used. It has the best sealing cap and cures rapidly and reliably when confined between metal parts. Use it to lock threaded fasteners, nuts, bolts and screws from loosening. Extremely important in critical engine and suspension parts.
If you work around your Mercedes much this is a great tool to have. The quality is exceptional for the price. It will reset to measure in both inches and millimeters. A Must Have for Ajusting Diesel Fuel Injectors 190D 200D 220D 240D 300D 300CD 300TD 300SD
When changing a front door seal on one of the above chassis you most likely will ending up need new attachments clips (along front edge of door). The majority of the old clips will break when you try to remove them.
Fits 114 115 116 123 and 126 Chassis. This set of detailed PDF instructions and plastic insertion tools with help you remove and install the front and rear door seals in your older Mercedes sedan or wagon.
Applies to all 110 115 116 123 126 201 124 140 diesels from 1961 to 1994. From my many years of working professionally on Mercedes diesels I have learned fuel injectors are the single most neglected maintenance item. I believe there are a number of reasons for this.
Have you ever wished you could get your hands on a manual that would answer all your diesel complaint questions?
Almost all Mercedes gas and diesel engines from the late 50's up to the early '90s used pressed in steel pins to hold the timing chain guide rails in position (inside the engine block).
This kit will work on all 115, 116, 123 and 126 chassis diesels from 1969 to 1987. Almost every old Mercedes diesel I see needs to have the motor mounts changed. If you have a mechanic do it for you it will cost an arm and a leg.
IMPORTANT NOTE: We do not sell replacement antenna masts by year and model. We have run across too many problems with confusion, interchangeability, and previously swapped antennas. We sell a SMOOTH TAIL mast and a TOOTH TAIL mast.
Brand new Diesel intake valve guide, size standard 14 x 10 x 60 mm, made by TRW. Fits pretty much all 4 and 5 cylinder diesel engines up to designation 617.952. We have quite a few, so if you need more than one just change the quantity in the shopping cart!
Cigar shaped return fuel hose from top of factory filter to return hard line. Fits all 300SD TURBO diesels from 1978 to 1985. Also fits 115 300D 5 cylinder 1975 to 1976 (but not 4 cylinder). 327 mm in length. Check to see if yours is cracked today!
Cigar shaped return fuel hose from top of factory filter to return hard line. Fits 115 220D, 240D four cylinder only and all 123 diesels from 1977 to 1985 (both 4 and 5 cylinder and turbo and non turbo. 265 mm in length. Check to see if your hose is cracked today!
2007-12-05ALERT! Before you replace your suspected failing brake booster you might want to change the o-ring seal between the master cylinder and booster first.
Long drive pin punches are very handy when working on your Benz. The smaller size in this set is particularly helpful when removing and replacing twin pin style brake pads. All steel. Made in India. Pin sizes: 1/8'', 3/16'', 1/4'', 5/16'' and 3/8''
Good used interior black plastic lock knob, common on most models in the 1970s and 1980s. This has good plastic and good threads. Sold as a single unit, if you need more, just change the quantity at checkout.
Good used front crank bolt 3 spring washers. Sorry we do not have any bolts.
Brand new Genuine OEM hubcap clips for Chassis 108 114 115 116 107 123. Sold in a set of FIVE.
These will fit the standard 14 inch round hubcap on all chassis listed above.
Applies to 240D 300D 300CD 300TD 300SD Diesel This guide is written specifically for owners of 123 and 126 diesels from 1977 up to 1984. There are some sections that apply to the 115 and 116 chassis but it is not specific to those models.
Fits all Diesels from 1965 to 1985
Excellent used set of torque converter bolts with correct washers included. These bolts are critical and I often see them replaced with improper bolts. There are six that are required to hold the flex plate to the torque converter on all Mercedes diesel engines from 1969-1985.
This is a great kit for your 350SL, 450SL, 450SLC, 380SLC, 380SL, and 560SL from 1972 to 1989. It also fits all W114 and W115 Sedans and Couple both gas and diesel from 1968 to 1976. Brand new UPPER control arm inner bushing repair kit.
Brand new upper ball joint assembly with hardware. Fits all 114 115 Sedans and Couple both gas and diesel from 1972 to 1976. Also fit early SL and SLC convertibles and coupes - all 450SL, 450SLC, 380SLC, and 380SL from 1972 to 1985. Replacing the upper ball joint is not a do-it-yourself job.
This is a great kit for you 114 and 115 owners. Fits all Sedans and Couple both gas and diesel from 1968 to 1976. Also fit early SL and SLC convertibles and coupes - all 450SL, 450SLC, 380SLC, and 380SL from 1972 to 1985. Brand new set of 2 lower ball joints. This is not a do-it-yourself job.
This is a great kit for you 114 and 115 owners. Fits all Sedans and Couple both gas and diesel from 1968 to 1976. If you are getting a lot of body roll in the turns this kit will really tighten up the front sway bar.
This 5 piece set is made out of plastic so it will not mar or scratch paint, glass, chrome trim, etc.
Good used front seat back tilt adjusting knob with all three tabs still
intact. One or more of these three tabs often get broken off when removing
making for a sloppy and loose knob. Check to make sure your current knob
Yes, with age they can leak from the inside out ever so slowly. Replace before they fail! This is a great upgrade that fits most models from early 70s up to mid to late 90s. The wire protector on these hoses will prevent chaffing especially from loose V belts.
Fits all models from the late 1960s up to the early 1990s that use a contact grounding spring inside the front hub bearing grease caps. Sold as a set of two (2). This important copper spring provides a clean contact to ground for the brake pad sensor wire.
Brand new oil pan repair kit. Includes new pan, new pan gasket, and new oil drain plug. Fits 115 chassis 220D, 240D and 300D. Also fits all 123 chassis non turbo 300D diesels from 1977 to 1981, and 240D from 1977 to 1983. Gasket and drain plug included, but not shown.
Genuine Mercedes special o-ring set to repair the leaking brass heater valve levers on your 1967 to 1973 108 / 109 sedans and 1968 to 1976 114 / 115 sedans and coupes. These are not your normal orings. These are a custom design made specifically for the heater valve control barrels.
In stock and ready to ship. New aftermarket fan clutch replacement for 113,111, 108 and 109 chassis gas engines from 1968 to 1973, all 114 and 115 gas and diesel, all 123 gas and diesel engines 1977 to 1983 and 1981 to 1983 126 300SD.
Emergency brake shoe maintenance is often neglected because the rear brake disc / rotor has to be removed to inspect and repair them. If the car has ever been driven a long distance with the emergency brake on, expect problems.
Fits all Mercedes models with 14" steel wheels. Here is one brand new lugbolt. Good to have on hand as most spare tires are mounted on steel rims! Make sure to never use the lug bolts from alloy wheels on your steel wheels! The measurements are M12 x x1.5mm with a 38mm overall length.
Fits all Mercedes models with the 14" Alloy bundt cake style wheels. The measurements are M12x1.5mm by 51mm overall length. This is a set of five brand new silver lug bolts.
This part controls the function of your backup lights as well as the starter motor lock-out if you do not have the transmission selector in park or neutral. It is called the neutral safety switch and fits all 107, 114, 115, 116 and 123 chassis to 1981 (except 81 Turbo wagon).