Get $20.00 off any order of $150.00 or more (excluding shipping) Enter coupon code JOY20 at checkout.
After years of "fighting" fuse replacement, Kent finally decided he had had enough! And so was born another special tool. It is designed to securely grab hold of a ceramic fuse, remove it from it, and replace it with minimal exertion and no damage.
Fuses, supplies, tools and video instructions (below) to restore most older fuse boxes to better than original condition.
This is another small "frustration" for W123 diesel owners. The fuse box cover is mounted flat to the firewall behind and to the left of the brake booster. You can not just pull it straight out nor can you just push it straight back on.
Fuses, supplies, and video instructions (below) to restore most older fuse boxes to better than original condition.
Fits chassis 116 123 126 124 and 201 Diesels with pencil glow plugs, from 1978 to 1989. This includes the OM617, OM601, OM602, and OM603 engines. They also work on 1977 to 1979 300D 300CD and 300TD with series glow plugs. This pack includes three individual fuses.
Have you been having electrical problems in your older Mercedes? Maybe you have taken the fuse box cover off and wiggled a few fuses and it has solved the problem for a while. You probably noticed corrosion on the tips of the old aluminum fuses.
50 amp fuses were used on most 123 240D diesel glow plug systems due to the lower amp draw. 80 amp fuses will also work but some may choose to go with original spec. Check the number on the center of the fuse you are currently using. It should read either 50 or 80.
Yes, there may be a fuse inside or outside your fuse box that controls your heater blower motor or another high amp draw electrical component. Most of the separate fuse holders require a 30 amp fuse. You may find a funny looking bent fuse inside your fuse box.
This is an excellent replacement if yours has melted and deformed.
When an old Mercedes ( or any other car for that matter ) has sat idle for over a year it can be a challenge to get it safely back on the road again. If it has sat idle for more than 5 years you may find it difficult to even get the engine running.
When an old Mercedes ( or any other car for that matter ) has sat idle for over a year it can be a challenge to get it safely back on the road again. If it has sat idle for more than 5 years you may find it difficult to even get the engine running.
PLEASE NOTE: Wire color may be all red or all black (depending on stock on hand) Performing some fuel pressure tests on your K-jet or KE-jet engine
The parts in this little kit will do two things. 1. Protect your climate control push button panel. 2. The system will get more accurate readings from the climate control sensor on top of your dash.
PLEASE NOTE In stock now and ready to ship. No detailed instructions at this time, but it is not a difficult install this unit once you remove the false firewall at the back of the engine. You will be able to gain access to the monovalve and electric pump assembly.
Tired of having to pull and hold the glow / starter knob on your old 110 or 115 chassis diesel? Hand getting tired? Waiting forever to get the glow plugs hot enough to start the engine? Wish the glow plugs would not burn out so often?
WARNING: PLEASE confirm you have the original engine in your diesel BEFORE ORDERING this kit. We keep getting owners ordering this kit only to find out a later model engine has been installed. This happens quite often.
In this video Kent will walk you through the step-by-step procedures he uses when diagnosing and repairing an older Mercedes diesel engine that either won't start or is very difficult to start.
Replace your old and worn knob with this inexpensive genuine Mercedes part.
People call these two units pressure regulators, but really only one of them is. In this xx minute video, Kent will explain how these are different, what each one does, how to adjust them, and how to test them with a hand pump vacuum tester.
In this 8-minute video, Kent will show you how to quickly depressurize your D-Jetronic fuel system before doing any injector service, replacing any hoses, or hooking up our fuel pressure tester.
This kit will put a smile on your face, especially if you have done it before the "old way." Watch the video below for full instructions on how to use this kit to do the fastest fuel system depressurization in the world!
Since the original style Bosch electric pumps are no longer available, Kent decided to come up with a good alternative.
This an instructional "how-to" video that comes with our ACCIII performance upgrade it. It will show you how to install a protective fuse for your auxillary water pump and how to replace the rotton foam climate control hose under your dash. Total run time is 16:29.
Brand new Hazard Flasher rocker type switch, located in Center console between window switches for 240D 300D 300TD 190E 190D 300SD 420SEL 380SL and other models from 1982 to 1991. If you are unsure it will fit your model, visually verify picture with existing switch.
In part 1 Kent covered the key components, where they are located and what they do. If you are not familiar with this system we recommend you watch part 1 first.
If you own or are restoring a CIS fuel-injected Mercedes, a pressure tester is a must-have! This complete kit will allow you to do it yourself with complete instructions. Why buy a tester that you do not know how to hook up and may not even be accurate?
Testing fuel pressure is a simple procedure on the D-Jetronic engines, but it is absolutely essential.
Fits the Following, 1975 to 1976 ONLY 115 chassis 300D and 123 chassis 300D 300CD and 300TD from 1977 to 1979 with series style loop glow plugs. SVO / WVO applicable. If you are tired of glow plug problems, then this kit is made for you.
This is probably the very best upgrade you can make for your automatic climate control. It will switch the hot to cold or cold to hot much faster and will hold a much steadier heat at high engine speeds.
Can be installed on the following models: Please read carefully. All Turbo 116 and 126 300SD 1978 to 1985. All 123 turbo and non turbo 240D 300D 300CD 300TD 1980 to 1985. 1984 to 1989 201 190D. 1986 to 1991 126 300SDL 350SD and 350SDL. 1986 to 1993 124 300D and 300TD.
Are you tired of your sluggish heater system? Does it take too long to change temperature. Does it get hot when you want it to get cold.