Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
Leaking fuel injector pumps have become a very common problem in the 60x. engines produced from the mid 1980s to the mid 1990s. The early 60x.
New intake manifold gasket between head and manifold.
You should consider replacing this gasket when you remove your manifold to replace the glow plugs. Fits all 602 5 cylinder diesel engines from 1986 to 1993.
Brand new expansion tank fits all 201 chassis 190D and 190E 1984 to 1993 and 124 chassis 260E, 300E, 300CE and 300TE 1986 to 1992 only.
Be sure to add a new radiator cap!! Look below to order.
New Behr Thermostat and sealing ring rated at 87 degrees C. Correct fit for all 201 and 124 chassis 4 and 6 cylinder gasoline engines from 1984 to 1993. Most thermostats only operate at peak efficiency for few years and should be changed for optimal engine performance.
This is the unit that keeps your serpentine belt properly tensioned. This is a common part to see wear out in the 120,000 to 150,000 mile range. When it does, your belt will become loose leading to belt noise, overheating, and poor alternator output.
We only believe in using OEM ContiTech belts for your 103 engine. This new belt will install on 190E 2.6 to 1989, all 260E and 300E 1986 to 1989, 300TE 1988 to 1989, and 126 300SE/L Sedan 1988 to 1989.
For other years and models of the 124 chassis please use our contact page.
Fits all Mercedes models with 14" steel wheels. Here is one brand new lugbolt. Good to have on hand as most spare tires are mounted on steel rims! Make sure to never use the lug bolts from alloy wheels on your steel wheels! The measurements are M12 x x1.5mm with a 38mm overall length.
Fits all GAS ENGINE exhaust systems for W107, W116, W126, W124 and W201 chassis from 1972 to 1995. Gas engine exhaust systems are generally heavier and run hotter than diesel engine exhaust systems. This is a wider and more heavily reinforced exhaust hangar than the standard round type.
The Mercedes Multi-Link rear end is a marvel of engineering and works extremely well, but when one or more of the link bushings wear out, your car will start steering on its own! In severe cases when applying rapid power it may act like it wants to change lanes on you.
Set of (2) new rubber hood stop buffers to adjust the front corner closing of our hood. You will normally see the rubber ends missing, hardened or cracked. Replace and properly adjust for better hood closure. Fits all models that use stop buffers from 1963 to 1993.
If your oil cap is leaking oil or you find it very hard to remove then it is best to replace it. This new OE cap with fit all gas and diesel model engines from 1984 to 1993.
Brand New Reutter Expansion Tank Cap marked 140. This fits all 201 chassis 190E and 190D from 1984 to 1993 and all 124 chassis sedans, coupes and wagons from 1986 to 1995 both gas and diesel. A worn expansion cap is the number one reason for very gradual coolant loss.
For 200D 220D 240D 300D 300CD 300TD 300SD to 1985. This manual is written specifically for the diesel owner who wishes to know more about his engine and to understand how to tune and adjust it for maximum performance.
This is a brand new 3 way Vacuum change over valve. It is located in the engine compartment on a number of different chassis Mercedes, both gas and diesel models, from the 70s up through the late 90s.
This "permanent" red threadlocker is probably the best that I have used. It has the best sealing cap and cures rapidly and reliably when confined between metal parts. Use it to lock threaded fasteners, nuts, bolts and screws from loosening.
For those of you needing extra fiberglass cloth for your rust repairs, we have put together an ideal kit of the most commonly used types of cloth. These are the types that work best with Miracle Paint. Size many vary but it will be one square foot. You get 2 pc.
Fits the Following: All 201 190D, all 201 190E 2.3 and 2.6 and gas engined 124 260E and 2.6 1986 to 1993. Check carefully before ordering. Not returnable.
This kit fits many models of Mercedes from the late 1970s up into the late 1990s (see list below). Pump problems abound and when you change the pump you are much better off to change the old rubber seal and brittle washer braided hose at the same time.
FITS THE FOLLOWING: all 201 chassis (front doors only). A new set of two (2) FRONT door check straps for your 201 chassis Mercedes Benz 190E and 190D.
FITS THE FOLLOWING: all 201 chassis 1986-1993 WITH Single Wiper Blade.
Fits the Following: All 116,123,201,124 and 126 Chassis from 1973-1991.
This is the contact switch that allows the interior light to come on when you open your door. Also applies to the Trunk.
Fits all W126, W201 and W124 chassis 1981 to 1995. Brand new accelerate throttle pedal. Easy to install. Commmonly breaks where it attaches to the metal rod causing sticking and loss of power. Check yours out today. New rubber surface keeps foot from slipping off the pedal.
For use on all*** Mercedes diesels 1959 to 1993. BUT PLEASE NOTE THERE ARE SOME LIMITATIONS ON THE LATER MODELS. Test compression on 110, 115, 116, 123, 126, 201,124 AND 140 chassis. Almost ALL models up through 1987 can be tested through the fuel injector hole.
Fits all diesel Sedans AND coupes only from 1977 to 1999 (Does not fit wagons!) including chassis 116, 123, 126, 201, 124, 140 and 210 chassis. 190D 240D 300D 300CD 300SD 300SDL 350SD 350SDL 300D 2.5 and E300D 1977 to 1999. This is an important maintenance item.
This is a great gift for the older Mercedes Benz Enthusiast! Sold in increments of $25. This gift certificate can be toward the purchase of any item or items on our website .
The Monark brand is no longer made. The Bosch pump is hard to find. This is the best alternative we can provide. For older models with primer pump mounted on the injection pump.
Can be used in 110, 111, 108, 113, 114, 115, 123, and 201 chassis manual transmissions. Synthetic Gear Oil can offer smoother shifting especially on cold mornings before the transmission fluid has warmed up. It can also offer reduced wear on the gears and syncros over time.
WORKS ON THE FOLLOWING All diesel 110, 115, 116, 123, 126, 201, and 124 chassis. 190D, 200D, 220D, 240D, 300D, 300CD, 300TD, 300SDL, 350SD, 350SDL, E300D.When it comes to diesel engine performance this is your best bang for the buck.
ALERT! ALERT! 10 years after I first started warning about this, I saw it again in my shop on Feb. 20, 2011. Seems to be happening even more now as these radiators age. I loosened up the upper hose clamp on this 123 300TD radiator and it just fell off.
Here is a set of three straight inline fuel pre filters with strong plastic nipples and reinforced housing that fit 8 mm or 5/16 fuel hose.
PLEASE NOTE: WE SHIP EITHER FEBI OR HENGST AND COLOR OF FILTER SCREEN CAN VARY, DEPENDING ON WHAT IS AVAILABLE.
FITS THE FOLLOWING: All models PON, FIN, P55, 110, 111, 112, 113, 108, 109, 114, 115, 107, 116, 123, 124, 126, and 201 chassis. Here is my all time favorite gasket maker and sealant. You may already know how I feel about RTV silicone products (I think they should be outlawed!).
FITS THE FOLLOWING: 1985 to 1993 W124, W126, and W201 chassis with a 6 cylinder 103 engine. Is your M103 six cylinder engine not running as smoothly as it use to. These wires should be changed at 70,0000 to 80,000 miles for smooth running and peak performance.
Fits 124 201 126 Chassis with M103 engine only, including 190E 260E 300E 300TE 300CE 300SE and 300SEL . These are the current plugs Kent recommends for this 6 cylinder gas engine.
This Special Brass fitting can be used when making a electric boost heater for biodiesel or vegetable oil fuel conversions. It CAN NOT be installed in a diesel cylinder head. It can be used in the fuel system with all diesel engines that have been converted to SVO.
Fits 201, 126 (after 1986), 124 and 140 chassis four, five and six-cylinder diesel to 1995. This includes 190D, 300D, 300TD, 300D 2.5, 300SDL, 350SD / L ,S350, and E300D. Set of two new oil filters. Stock for spares ahead of time. Two oil filters shipped with sealing rings.
FITS THE FOLLOWING: 201 chassis 190D 2.2 and 2.5 diesels from 1984 to 1989. 124 chassis 300D and 300TD 1987 and 1990 to 1993. 126 chassis 300SDL and 350SDL 1986-87 and 1990-91. Get your later model Mercedes diesel ready for winter driving with this self service kit.
Fits 201, 126 (after 1986) and 124 four, five and six cylinder diesel to 1993. This kit should give you at least a year supply of fuel filters for your diesel. You will receive 2 main fuel filters, 3 clear plastic inline high quality pre-filters, and two main fuel filter o-ring set.
A diesel compression test is an extremely important engine diagnostic procedure. It should be done on any diesel you are planning to purchase. More than any other test, it can tell you if you are purchasing a healthy engine.
Applies to all Mercedes: Pre 1960, 190SL, 110, 111, 112, 113, 114, 115, 108, 109, 107, 116, 123, 126, 201 and 124 chassis. If you ever need to replace a fuel tank, fuel pump, fuel filter, or fuel hose and don't want the fuel running down your arm here is the tool and will save the day!
Fits later 107 and 123 as well as 126, 201, and 124 chassis oil caps (black plastic). Tired of having a hard time getting your oil filler cap off without using pliers. Or are you tired of the unsightly oil leaks around the cap. These gaskets can help solve those problems.
Fits the following: 201 chassis 1989 - 1993 190E 2.3 and 2.6 , 1987 - 1989 260E , 1988 - 1989 300CD , 1986 - 1992 300E 1990 - 1993 300E 4Matic, 1990 - 1992 300E 2.6 , 1988 - 1992 300TE , 1990 - 1993 300TE 4Matic, 1988 - 1991 300SE and 300SEL.
Sometimes you need the extra heat! Like when replacing heater motor brushes.