Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
In this 29-minute instructional video, Kent will show you how to convert your old points ignition to an efficient modern electronic ignition. Rid yourself of those old high-maintenance distributor points forever.
In this detailed 30-minute video Kent will walk you through the process of installing new tie rod ends on his 1959 Mercedes 220SE. The principles are the same on almost all models from the 1950s up to the 1990s. He will explain the differences in adjustment between the older and newer styles
Loose steering or wheels shaking at speed. This can often be worn out tie rod ball joints. The joints can be replaced as a DIY project. Watch the video below to see if this is something you want to take on yourself.
This kit includes:
You would be amazed at how much fuel can leak out of a fuel hose when you disconnect it from your tank or engine. This is an easy way to prevent messy spills.
This is a great solution to what is sometimes a nagging problem. This heavy duty and flexible and adjustable plastic spacer can be put on the top or bottom radiator to prevent chafing in and area where it might come in contact the the engine or the radiator.
This old rare manual is like new. Probably never been used. Just a library piece from an old collector. Spotless inside. This has a lot of good information not covered in the 190 Service Manual for the specific models listed in the title. Approximately one and one-quarter inch thick.
We starting using some of these to plug brake lines while changing out calipers. Then we started using them on fuel and oil hoses. Now we are using them all over the place and keep finding new uses for them on a monthly basis. These are a MUST HAVE! Watch the video below to become a believer!
Original printing. These have been in storage for over 50 years. One super thick manual covers all 190 pontons including sedans. The supplement manual covers 190SL and mostly focuses on the carbs. The original owner wrote his name on inside top of the first page.
Cad plating can be expensive but is great for show restorations. If you just want to make those parts on your old Benz look good then this is the closest paint Kent has found to looking like cadmium gold plating. Check out the pictures below of the fuel delivery brackets he did with this paint.
To many people, automotive electrical systems and testing are a big mystery. It is not as complicated as you might think.
This kit was developed by Kent primarily to fix leaking chrome wheels. The free on-demand video that comes with this kit shows the detailed process of cleaning and filling the corroded areas along the edges of the inside of the wheel to seal them and stop annoying tire leaks.
This is both an impressive and inspiring key chain for Mercedes owners and enthusiasts. Perfect gift item. Available in ALLOY wheel styles. Please see the related products below. Watch the video of Kent and Kaia's road trip where they gave the first one away!
In this 28-minute instructional video Kent with show you how to do a compression test on your own Mercedes gas engine and explain how to interpret the results. It is very important you do this procedure BEFORE "throwing" parts at your engine trying to fix a performance problem.
You might be surprised to realize you spark plug holes need cleaning - and yes some REALLY need cleaning! This 5-minute video will demonstrate Kent's method of cleaning the threads in the cylinder.
This manual is a complete guide for all brake component replacement for all 1965-1995 Mercedes Benz cars. It will help you identify common signs of trouble, inspecting brake components, and replacing major brake components - a necessity for any DIY brake job on your Mercedes Benz!
This package of lubrication products includes all those items listed below under related products. You can purchase each one separately or altogether here and save. To learn more specific details about each product click on any one of the related products that you see listed.
We have been talking about this for years. It was Ryan who got a friend to make this for us. It is a very high-quality vinyl with a special stick adhesive that "breathes" and does not allow bubbles to get trapped during application.
This 23-minute video will demonstrate how Kent repairs some small rust spots inside the fender wells of a W116 sedan. Disclaimer: This method of repair is not recommended for large rust holes under the car or for holes that have been caused by road salt.
PLEASE read the instructions below carefully on how you will view this video. It is NOT downloaded to your computer and viewing is NOT automatic. You must be logged in at Mercedessource.com and you MUST click on "my account".
Hard to believe we took so long to come up with this tool. It was Gerson's genius that made it happen. The secret turned out to be the hook that keeps the tool in place while stretching out the rubber donut. Wow! What a cool tool.
Works on the following: 6 cylinder gas MFI engines 1959 to 1972, 6.3 and diesel engines 200D 220D 240D 300D 300TD 300CD and 300SD through 1985.
This is a selection of used parts mostly removed from a 1958 220S. They should fit most 6 CYLINDER Ponton sedans. No specific description will be given on each part. There is no guarantee that all the parts will fit the described vehicle (mistakes can happen). Study the picture carefully.
You will receive two (2) five liter bottles more than enough to do a full oil change on any vehicle:
Introductory video
If you own one of the early Mercedes overhead camshaft engines from the mid-1950's up to the mid-1970s that have mechanical (non-self-adjusting) lifters this is a MUST HAVE tool!
This is one set that will pretty much do it all: door panels, radio, windows, interior trim, exterior trim, engine, fastener plugs, seals, etc. Strong enough to even change a bicycle tire...
UPS ground shipping only. Can not be shipped internationally. Rather than try to explain what this kit does and how it does it we are going to ask you to watch the video below if you have not already done so.
This is the very best hose Kent has found to use to install spark plugs in restricted spaces. Watch the video below and he will demonstrate.
Keeping your throttle linkage ball sockets and pivot points lubricated extends the life of the parts and maintains top performance for the engine as well as some of the later transmissions.
Want the best, fastest, and easiest way to polish faded anodized aluminum trim, to remove fine scratches from your glass, to loosen rusted and stuck fittings and bolts, and to sand rust out of tight places? - enter the multitool or multi-function tool.
If you already have a multi-function tool or you plan to buy either our glass or anodized aluminum polish kit ( see below ) you really don't need a second tool unless you want to dedicate one just for "banging" on rusty fittings and bolts. We offer this same kit with the tool included.
This tank works amazing! Put in the heavy rear end or trans fluid. Pump up the pressure. Stick the non-fall-out end in to fill hole... and just push on the valve in the handle of the filling wand.
This video is intended to be used as instructions when purchasing Kent's Rust Buster Tool. It can be viewed separately but you will need the tool to apply the principles. This video is included free of charge when purchasing the tool. See related products below:
Have you dreaded changing the rear end fluid before because it is a pain and ends up being really "messy?" Kent finally decided there had to be a better way so he went to work and came up with the idea of using a simple and affordable custom made pressure tank to "flush" and refill differentials
These are Kent's favorites. As shown in this video on youtube. Pack of 5 shipped.
Maybe you have even tried this only to have to patch fall on the floor when you walk away... ( it has happened to Kent... :-) ).
NOTE: Ships UPS ground only. Select ground for entire order to save in shipping costs. I am a great fan of LubroMoly products.
This super fine cloth along with Miracle Paint can really do some fine rust repair detailing. You can use it on a rough pitted area that you want to smooth out. Put on a couple layers of cloth and coat with Miracle Paint. Let dry and block sand.
This is a must-have if you have a prized Benz or any car you don't drive often!! If you let any of your cars sit for long periods ( generally over 30 days) without driving them, you can ruin your battery, especially if you let it go completely dead.
Works on W114, W115, R107, W116, W123 and W126. A better performing and more comfortable 14mm hex wrench to use when changing the fluid in your rear end. Will work on manual transmission with 14mm drain plug only. Watch the video to see why.
These are the instructions that come with our black engine and chassis paint restoration kit, but they will help you successfully spray paint almost anythings. These step-by-step techniques were developed by Kent over almost 60 years of spray painting cars and parts.
UPS GROUND ONLY: This is the best spray can paint Kent has found to detail the semi-gloss black parts on your Benz. It is not easy to find a good spray can paint!
2 large style clamps to be used on upper and lower radiator hoses. Use these to replace your thermostat or water pump without having to drain all your coolant out of the radiator. Works on medium size coolant hoses also.
If you have been enjoying Kent's free Youtube videos but have not yet purchased and watched one of his on-demand "meat and potatoes" videos, we guarantee you are really missing something.
This is the best tool to use when installing or removing the Monark hand primer pump. PLEASE NOTE. This is 19mm and will NOT work on the Bosch hand primer pump or other style pumps (most others are 17 mm).
In this video instruction Kent will show you how he installs our battery tender kit in a W124 Mercedes.
Over the years I have used lots of different methods to clean off rust before applying Miracle Paint. This is the best and quickest method I have found. This is a great tool that can be used for many other things like cleaning off brake hubs and rotors.
Here is a wrench I should have made 15+ years ago. I can not believe how much time and frustration I would have saved over the years working on all those 100's of Mercedes diesel engines if I would have done it!
Good used injector housing for parts or for rebuilding. Does NOT include the nozzle. This is a core part only and will not work in the engine without new nozzle installed.
This is a collection of SPECIAL tools Kent has put together to help you grab, twist, and pull on things in and around your Mercedes. He makes each one of these tools right here in his shop.