This is the Permatex Brand Extreme Brake Parts Lubricant. 100 percent synthetic formula with ceramic solids. It resists moisture and corrosion and will not wash out. Lasts longer than any other caliper grease. Silences brake noise across a much wider temperature range.
Search | W124 | Brake
Old cars and brake issues go hand in hand. Especially if the car is not driving very often. Brake problems usually first show up as “dragging” or sticking brakes. If this issue is not dealt with immediately it can lead to serious problem including the car catching on fire.
This is a must-have if you attempting a caliper rebuild on one with stuck pistons. If you own one of our injector pressure testers here is a great add-on that will allow you to use the tester to remove stuck pistons from old brake calipers.
You can save a lot of money if you can rebuild your old brake calipers, especially on some older models. If you can just get the pistons out of the housings, most calipers are rebuildable, unless they have been subject to road salt or have sat exposed to the weather for years without use.
Covers 1965 to 1995 110, 111, 112, 108, 109, 107, 114, 115, 116, 123, 126, 201, 124, and 129 Chassis master cylinder, pads, rotors, calipers and flexible brake hoses.
When used for bleeding or flushing your brake system, a single person can do a rapid fluid flush! No mess and very efficient. Will work on all Mercedes from 1968 to 1995 - Also select 1960's models and most later chassis up to 2006 see list below: 25-minute video instructions are now included.
There are other brands of brake pad anti-squeal paste on the market, but for me the factory Mercedes paste has proven to be the most effective. It simply stays in place and holds up better over the long haul.
Born out of frustration this twin chamber plastic bottle has solved two of Kent's biggest head aches when brake bleeding or flushing brake systems.
This 12 page instructional booklet by Kent Bergsma (8.5x11 page size) covers brake bleeding equipment and procedures for all model Mercedes from the mid 1950s to the mid 1990s. This covers chassis Ponton 110 111 112 113 108 109 114 115 116 107 116 123 126 201 and 124.
For use on most Mercedes from 1969 to 2006 (see exceptions below)- UPS Ground Shipping ONLY! Buy the complete kit and save $$. This is almost everything you need to do a fast, clean and efficient brake fluid flush on your older Mercedes Benz passenger car.
Our flexible brake hose kit includes front brake hoses, rear brake hoses, 1-liter high-performance brake fluid, 9x11 mm Flare nut wrench, thread sealant and three pairs of nitrile gloves, and complete pictorial instructions.
These are great and can be used on very heavy calipers attached to multiple places. Make brake work easy and protect your hoses and sensor wiring.
Whether your just changing pads, hoses, or doing a complete brake system overhaul, the items we include in this DIY will guarantee the job gets done with no mistakes, minimum frustration, and lasting results. There is no other kit like this anywhere.
This manual is a complete guide for all brake component replacement for all 1965-1995 Mercedes Benz cars. It will help you identify common signs of trouble, inspecting brake components, and replacing major brake components - a necessity for any DIY brake job on your Mercedes Benz!
From Kent's experience engine coolant and brake fluid are the most neglected fluid maintenance items on older Mercedes. He knows it can be a pain to change them every two to three years, but if you don't it is going to cost you dearly.
That is right - this is brand new - NOT rebuilt. It fits the passenger side rear wheel ONLY. The caliper comes with new pad mounting hardware and new bolts. These will soon be gone forever... Special price limited to stock on hand. Sorry, we do not have the left side.
Tired of having to remove your wheels and tires to bleed your brakes? This tool makes it possible and really saves time. Watch the video below for more details and instructions on how to use it.
This is a full 25-minute step-by-step instructional video on how to properly flush or bleed your brake system using our pressure brake bleeder and fluid capture tank.
Kent came up with this kit because of all the times he replaced e-brake shoes only to end up with battered knuckles and extreme headaches. This video is included free with the purchase of the toolkit.
This video is intended to be used as instructions when purchasing Kent's Rust Buster Tool. It can be viewed separately but you will need the tool to apply the principles. This video is included free of charge when purchasing the tool. See related products below:
One day Kent "finally had it!" Replacing parking brake shoes was always a dreaded job. As he thought about it he realized the frustration was mostly due to the hassle of getting all the holding springs on and off. So he set out to develop a new tool.
These are the instructions that come with Kent's brake pad and brake caliper service kit. It is possible to make your own service kit by watching this video. To purchase the kit see related products below. To learn more about the importance of this kit watch the video below:
Brakes are one of the most often neglected maintenance items on older cars. This is not just related to Mercedes Benz. Most owners don’t realize that brakes need special attention and service not only when pads are changed but every 2 years.
This 12 page instructional downloadable booklet by Kent Bergsma covers brake bleeding equipment and procedures for all model Mercedes from the mid 1950s to the mid 1990s. This covers chassis Ponton 110 111 112 113 108 109 114 115 116 107 116 123 126 201 and 124.
5 page digital PDF Instructions include multiple pictures to assist you in completing the job. Clear and detailed with tips and tricks from Kent Bergsma's years of experience.
We also highly recomend the Ultimate Flexible Brake Hose tool to complete the job. Look below to view.
Older Mercedes have a very effective emergency brake design which was virtually the same on all models from the late 1960s right up through the early 1990s. The actuating mechanisms are all mechanical and are controlled by a Y cable under the car.
Sil-Glyde is a silicone based brake lubricant recommended for the entire brake assembly and is compatible with rubber. It is moisture-proof and heat resistant to +600 degrees F, which means it won't burn-off like other brake noise products.
WARNING: Can only ship inside the USA via UPS GROUND. If you have other items in your cart do not choose expedited shipping or US postal service! High Performance low moisture absorbing DOT brake fluid.
Here is a neat little protection cap that is most often missing on well over half the Mercedes I ever see. These fit over the caliper bleeder screw to prevent dirt and grime from entering the nipple. 4 are required per car and fit both front and rear calipers.
You asked for it so we made it happen. Many of you have been wanting to know what we use for high temp thread sealant (when we don't want to use the permanent epoxy). We don't like thread tape or anything with Teflon in it.
This small rubber cap protects dirt from entering your level indicator on your brake fluid reservoir. Fits 107 114 115 116 123 126 201 and 124 models from the early 70s to mid 1990s.
Set of new sensor wires for front brake pads on all 201 and 124 chassis from 1985 to 1993. Only one required per side. These should always be changed when replacing brake pads.
Fits all models from the late 1960s up to the early 1990s that use a contact grounding spring inside the front hub bearing grease caps. Sold as a set of two (2). This important copper spring provides a clean contact to ground for the brake pad sensor wire.