Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
Some of those early fuel injections systems can be troublesome. If you don't understand the system or how it works you will never be able to troubleshoot it successfully. This manual explains the different comp0nents in the system, their purpose, and how they interact together.
Rebuilt 65 amp alternator without pulley or fan. You will need to install the fan and pulley from your existing alternator. The voltage regulator is included. No Core charge. No hassle trying to have to ship back your old one.
WILL NOT FIT 85 CALIFORNIA MODELS!! It will fit some 1985 Federal Models only.
Some of the most common auto transmission leaks on the early automatics come from the banjo bolts that connect the filler tube to the bottom of the pan and the two transmission coolers lines to the lower front transmission housing.
This is a very common failure item on the older gas models. The braided outlet fuel hose will rot and and begin by weeping fuel through the hose. When it finally fails it can be dangerous and leave you stranded on the road. Large amounts of fuel will come pouring out of the tank.
New Bosch fuel filter as shown. Before ordering please make certain that this fits your Benz. Not all gas fuel filters are created equal.
Brand new Mercedes Benz Drivers side front door inside chrome door pull for all 123 sedans and wagons 1977 to 1985. It is very common for the handle pin to wear out (floppy handle) or cast frame will break.
This kit is for replacing the bushings associated with the engine shock. Sold Individually.
Good used NON-automatic front dome light as shown. 3 prong switch. Make sure this confirms to your model.
This important rubber coupler connects your steering column shaft to the steering box input shaft. Inspect yours for cracking now. Always replace when replacing steering gear box.
NEW Genuine Mercedes Modulator Cap. Check to see if yours is cracked. Cap removal is required for modulator adjustment.
Typical old and cracked rubber cap:
Fits all 110 111 113 108 107 116 114 115 123 126 201 124 129 140 early 60's to late 90's
Complete reseal kit as shown. Wow!
Sorry NO instructions available.
WARNING: Can only ship inside the USA via UPS GROUND. If you have other items in your cart do not choose expedited shipping or US postal service! High Performance low moisture absorbing DOT brake fluid.
These washers are installed right under the four nuts that hold the valve cover securely to the cylinder head. They help to prevent the over tightening of the valve cover as well as prevent the nut from loosening up. They also keep the nut from gouging the metal out of the valve cover.
Set of good used original pan bolts with washers. Will work on lower metal pan as well as vacuum pump housing. Common places for these bolts to round out.
Applies to all 200D 220D 240D 300D 300CD 300TD 300SD 1965 to 1985
Right rear pin and slide as shown. This is a common rust part and the threaded pin must be removed to remove the sunroof panel. This pin also rides up on a ramp to close the rear of the sunroof flush with the roof.
Good used set of oil cooler mounting clamp brackets. BOLTS are missing but they are standard metric that you should be able to pick up at a good hardware store. Two are used to secure the cooler to the radiator.
These are the Genuine Mercedes felt feet (pad or pads ) that most W123 sunroofs slide back and forth on (note - there are some early models that did not use these - inspect your feet before you order! Most wagon manual sunroofs do not use them either - check your roof first.
Another High Quality product from Lubro Moly. This is a 300ml can of Motor Oil Saver. It Rejuvenates rubber and plastic engine seals and reduces oil consumption via the piston rings and valve guides; counteracts the loss in viscosity of motor oils.
Another high quality product from Lubro Moly. This is a 90g tube of CV Joint grease for long term lubrication use. It is excellent for wheel bearings and ball joints as well.
Another high quality product made by Lubro Moly. This is a 50g tube of Gear oil additive. It is a concentrated moly based treatment for manual shift transmissions, differentials, steering boxes, transaxles, and rear axles. Reduces Gear noise and whine, smooths shifting.
In stock now. If you are going to pull your transmission to replace any clutch components you should do it right! That means to replace all key wear components so you don't have to remove the transmission again any time soon.
If you are going to pull your transmission to replace any clutch components you should do it right! That means to replace all key wear components so you don't have to remove the transmission again any time soon. Go with the best so the repair will last the longest.
This is an original first aid kit. It came out of a 1981 300D. Contents look mostly complete and are original. I have 2 so it may or may not exactly have everythings inside as shown below. It probably should not be used as a first aid kit. This should be for original cosmetic purposes only.
Make certain your pump only has one main line coming into it. Very good cover plate as shown. No cracks or wear. No other parts included. To be used if your cover plate gets damaged. Sorry no complete used pumps available.
USED
Above average condition drivers outside mirror - good working adjustment mechanism. Good glass and chrome. Not perfect but very usable and presentable. May need a little flat black paint touchup on the face frame. Will not fit coupes.
If you have a leaking transmission seal it can be a real bear to get the old seals out without this puller tool. It works on both the front and rear transmission shaft seals. This tool also works great for removing the front crank seal on both gas and diesel engines.
Two replacement levers as shown. NOTE: Often the valves are still ok but the lever is worn off.
Common diesel transmission leak source. These aluminum washers fit on each side of the banjo connection where the oil cooler lines bolt to the right and left front side of the transmission case. Fit 300D 300TD 300CD and 300SD with automatic transmissions from 1981 to 1985.
This complete kit ncludes both inner and outer rear end wheel bearings and seals with groove nut and grease. Fits chassis listing above including the 123 300TD wagon, from 1974 to 1991. If you need bearings for both sides order 2 of these kits.
This is a maximum thickness rubber shim (19 mm thick) to adjust the ride height when installing new or reinstalling existing rear coil springs. Two required per car. Also fits 114, 115, 116, 123 sedans and coupes and 126 chassis cars.
This is a medium thickness rubber shim (14 mm thick) to adjust the ride height when installing new or reinstalling existing rear coil springs. Two required per car. Fits 116, 123 sedans, wagons and coupes and 126 chassis cars.
These special springs are unique to wagons only. They are designed to only support the weight of the car when it is unloaded. With age and malfunction hydraulic struts these springs can weaken and allow the rear of the vehicle to sag.
There are two gas filled accumulators of this style under the rear of the 1979 to 1991 123 300TD wagons, 201 190E 16v and 126 560SEL sedan and 560SEC coupes with self leveling rear suspension ( SLS ).
This item can only be shipped UPS Ground because it is a liquid. One Liter of correct Power steering fluid. Fully compatible with Dexron II systems but has enhanced aditives to reduce steering box gear wear.
For all 111, 112, 108, 109, 114, 115, 107, 116, 123, 126 and 201 chassis (Non tilting roofs up through 1986). Do you have a power sunroof that is working poorly or maybe not at all? Does it move slowly or not at all in the morning, but when it heats up during the day it works just fine?
For all 111, 112, 108, 109, 114, 115, 107, 116, 123, 126 and 201 chassis (Non tilting roofs up through 1986). Do you have a power sunroof that is working poorly or maybe not at all?
Complete kit for the DIY mechanic. Includes repair parts, special tools and step-by-step illustrated instructions.
When these part wears, the control rod will move back and forwar and the joints will clunk when you go over bumps. This is becoming a very common failure part on these older 123 chassis. We provide you with replacements for BOTH sides (inner and outer as shown).
Common 123 front end wear item. Bushings attach the lower control arm to the frame. Rubber fails and front end gets loose and noisy.
Location of lower control arm bushing
Bushing kit that attaches the front suspension guide rod to the lower control arm. This is a wear point that is often neglected and if loose can cause clunking in the front end. This is a complete kit for both sides. 2 kits included.
These bushing go on either side of the upper control arm where it attaches to the stabilizer arm. These should be replaced if worn or installed new upper control arms. SOLD IN A SET OF 4 as required by car. See related products below for the upper control arms that these bushing fit into.
Only one available as shown. Good working and tested used electric aux fan and shroud. Hard to find. Keep in mind this is a used unit but it is a very good one. Fan runs strong and reasonable quiet ( no bearing noise
Brand New Engine block gasket set for 4 cylinder 240D.
When replacing front brake discs on above chassis it is highly recommend you replace the bolts that hold the rotor to the bearing hub. Not needed on 201 124 or 129 chassis. Sold individually. 5 required per wheel.
.Please review picture. What you see is what you get. 3 different lengths.
Excellent used rear window washer tank. Not cracked. Fits all 300TD 1979 to 1985. Does not include pump motor.
Brand new Auto transmission torque converter drain plug for All Mercedes, gasoline and diesel, from the late 60s up to the late 90s. If you are doing a complete transmission flush you will need to drain the torque converter. Good to have spare on hand!