Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
After years of "fighting" fuse replacement, Kent finally decided he had had enough! And so was born another special tool. It is designed to securely grab hold of a ceramic fuse, remove it from it, and replace it with minimal exertion and no damage.
In this long video manual Kent will walk you step-by-step through the process of removing the older square style leveling valve from your Mercedes, opening it up without losing the spring and balls, removing the old o-rings and cleaning the parts properly, installing the new o-rings, and putting
PLEASE NOTE: DOES NOT FIT 1978-1980 W116 300SD Motor Mount Arms!
Have you ever tried to get those old stuck pad sensors off your front calipers? Have you had much success doing it without damaging at least one wire? Kent has had the same frustration over the years so finally designed a custom tool for the job.
In this video Kent will walk you through the procedure of removing the old accumulators and installing new ones in a W123 300TD wagon. It is a very straightforward job that only takes a couple hours. You will need to raise the car and safely support it on jack stands.
These are the instructions that come with Kent's brake pad and brake caliper service kit. It is possible to make your own service kit by watching this video. To purchase the kit see related products below. To learn more about the importance of this kit watch the video below:
Brakes are one of the most often neglected maintenance items on older cars. This is not just related to Mercedes Benz. Most owners don’t realize that brakes need special attention and service not only when pads are changed but every 2 years.
If you have had to remove any of the banjo bolts you can see that those sealing rings are getting quite old... when you see scoring in the ring the ring appears to be crushed, they should be replaced to prevent leaks and to prevent air from getting into the fuel lines.
Good used straight tubing as shown. NO DENTS! The OLD Seals and o-rings may or may NOT be included. You will need to order new seals if you don't already have them. See related products below.
NOTE: UPS GROUND SHIPPING ONLY. This complete kit will help you flush the old ATF fluid out of your power steering system and replace it with new high-performance power steering fluid.
If you have a 1985 or older Mercedes Benz it is time you flush that old automatic transmission fluid out of the system and replace it with a good power steering fluid. ATF formulations have changed over the past 20 years.
This is a very good set of four used special bolts that have good undamaged hex heads.
When replacing the front upper control arms you formost need to think about safety. You will need a good quality and large rolling hydraulic floor jack, and a couple good jack stands.
This is a collection of SPECIAL tools Kent has put together to help you grab, twist, and pull on things in and around your Mercedes. He makes each one of these tools right here in his shop.
Good used set of studs for the valve cover as shown.
One used bolt as shown in very good condition. May need cleaning for show
This instructional video covers the procedure for flushing the old hydraulic fluid out of an SLS system and installing new fluid. The example shown in this video is from a W126 560SEC.
This is a very high quality finish wrench set. The 13mm combination wrench that is 8 inches long. The 17mm has a ratcheting box end great for alternators, bumpers, etc. and is 11 inches long. The 18mm for 1996+ models is also 11 inches long.
Want to try to make your car's engine and engine compartment look like it just came off the showroom? Would you like detailed information on the chemicals, brushes, tools, and procedures Kent uses to get his engine compartments looking so nice?
Kent put together the three most important products you will need to use his pressurized method of setting the critical timing on your diesel engine injection pump. This is often negelected and when corrected can lead to faster starts, better fuel economy and less engine smoke.
This one hour long on demand video is included free with the purchase of Kent's OM61x injection pump timing kit. The method he teaches uses his own kit, his custom built pressure tank, and his special IP snake wrench.
Another wrench designed by Kent Bergsma and born out of frustration. This could be the weirdest wrench anywhere in the world! While shooting a video on adjusting the injection pump timing on an older Mercedes diesel Kent ran into a big problem.
These are all 3/8 inch drive hex sockets. All are the same length 11 cm total length. These are great to have with the short hex just won't reach long enough.
The 1/4 inch drive sizes include 2, 2.5, 3, 4, 5, 5.5 and 6mm. The 3/8 inch drive sizes include 7, 8, 9, 10, and 12mm.
Removing the tilting sunroof panel is a little bit of a mystery to many owners. Since there are no exposed fasteners, at first glance it can appear to be very difficult to remove.
Indications that your seal needs replacing are tears in the lip and no resistance when you close your trunk. If you trunk snaps shut too easily it means the seal has collapsed and is no longer sealing properly.
Instructions to complete a diesel system purge. Does not include instructions on changing the filter
Lubro Moly Diesel hi test fuel additive that does far more than just add lubrication to the fuel. Formulated for the new low sulfur diesel fuel. Contains an additive against injection pump and injector wear.
This 12 page instructional downloadable booklet by Kent Bergsma covers brake bleeding equipment and procedures for all model Mercedes from the mid 1950s to the mid 1990s. This covers chassis Ponton 110 111 112 113 108 109 114 115 116 107 116 123 126 201 and 124.
For all 108 109 114 115 107 116 123 126 201 and 124 Chassis 1968 to 1995 including those models that have a special cable installed to keep the transmission locked until the key was turned.
If you have a 1969 to 1985 4 or 5 cylinder diesel (except the 1984-85 190D) you may have already noticed it is hard to get the valve cover totally sealed from weeping oil stains coming out the bottom or top of the valve cover gasket.
These are the instructions that are included free with all of our Rear Subframe Mount Replacement kits. If you are interersted in seeing what this job entails, or you have the parts already, then these downloadable instructions are great.
During his years of working on diesel engines, Kent has learned a few things about glow plugs. Some he learned the easy way and others he learned by “pain and suffering.” If misunderstood or improperly maintained, glow plugs can be the “achilles heal” of a diesel.
This book explains how a parallel pre-glow system works and how to properly test it using inexpensive electrical testing equipment. If your PENCIL style glow plugs are not working properly, you need to find the cause BEFORE you start buying parts.
When an engine is both overheating and losing coolant, you first want to exhaust all possibilities that the cause is something simple or inexpensive to repair. It is possible it might just be a stuck thermostat with a faulty water pump leaking coolant at the same time.
If a car has sat outside in the elements for long periods and has not been washed or waxed in months there are some things you need to do BEFORE you apply the buffer to the body and the final wax to the paint. This is where you will need some real "elbow grease."
Wheel bearing maintenance and service should not be neglected. If you are hearing strange rumbling noises up front while driving you should check your wheel bearings. Replacing them is not a diffiuclt D.I.Y. job if you have the right knowledge and tools.
When you are out looking to buy an older Mercedes in this time period you have to be careful. You have heard that these old Benz (particularly the diesels) can go forever! So why is mileage that important. Because contrary to those "myths" they do not go forever without impeccable maintenance.
If your engine is just running hot, it may be due to a plugged radiator or possibly a stuck thermostat. If your engine is just losing coolant it could be a leak in the water pump, radiator or hoses.
In this video Kent will show you how to rid your car of those less than attractive rock chips and other paint flaws from door dings and general scratches. He will walk you through the paint and supplies you will need and then demonstrate step-by-step using a 2000 S500 and a 2000 E320 wagon.
In this video Kent explains some of the key reasons for poor battery contact and loss of voltage to important electrical components. If you want your later model Mercedes to run a peak performance pay attention to your battery.
This unique tank not only functions as an emergency fuel tank, but it can also serve to help troubleshoot diesel engine performance problems as well as complete a clean and efficient diesel purge.
When Kent set out to find a good fender cover for his own use he and Kaia decided to make it available to our customers. Who doesn't like a good soft fender cover that stays in place? We know red shows the grease more than black but you have to admit these are a knockout!
From my experience the only thing that goes wrong with the front seat back pockets is the top bungie cord that holds the net up wears out (loses its “spring”) and sags badly. When was the last time you saw a 1973 to early 1990's seat back netting that was NOT sagging???
If you need more than one just change the quantity in your shopping cart. If you would like to order the kit look below.
These five page step-by-step illustrated instructions will walk you through the correct procedure of removing your old worn and cracked door lock rubber diaphragms from the actuator housing and replacing them with new ones. These are procedural instructions only.
Please note: Does not include sprocket. The pump has been taken apart and inspected. No excessive tooth scoring. Bolts are loose. The pump will need to be cleaned - oiled and reassembled before installation. Excellent used condition.
Do you have a manual or power sunroof that is working poorly or maybe not at all? Does it move slowly in the morning, but when it heats up during the day it works just fine? Do you have to assist it by hand to get it fully opened or closed?
Here is a great way to save some money repairing your old Mercedes vacuum door lock actuators. When they go bad it is almost always due to cracks in the rubber diaphragms. These can be easily replaced once you remove your door panels and remove the units.