Search | Ponton | Engine

Displaying 1 - 41 of 41
On Demand Video
Cleaning and Detailing a Mercedes Engine Compartment- On Demand Video Instruction
$4.99

Extreme Detailing Part 4: Cleaning and Detailing an Engine Compartment Safely - On Demand Video

Kent will show you how to get it super clean with minimal water and overspray

In this 14-minute video instruction, you will get to see how Kent cleans and details an engine compartment in a W210 E430 using his favorite chemicals and techniques. This includes using less than a gallon of water and controlling the spray rinse so you protect sensitive electrical components.

$8.95

Anti Corrosive Gel for Magnesium and Aluminum

For protecting clean and bare aluminum and magnesium engine parts

Kent has been working a long time to find a way to stop the ugly corrosion on aluminum and magnesium engine parts. Particularly valve covers and intake manifolds.

$24.50

Custom Made Large Angled Head Clamping Tool

Multiple uses for hose removal, assembly, and holding parts safely for cleaning and polishing.

This is one of Kent's favorite tools around his shop. It is used almost daily. The tool rose out of a need to be able to safely hold fuel inectors while cleaning when with a large high speed wire wheel. No tool like this is availabe so it had to be built in our shop!

$80.00

OM 636 Diesel Engine Monark Fast Glow Plugs x 2

DISCONTINUED BY MONARK FEBRUARY 2018 --We have 2 plugs left for someone who needs spares.

Only two plugs are available. These are best for spares with an engine that already has fast pencil plugs installed.  They fit 4-cylinder flat head diesel 636 engines built in the 1950s.

$16.95

Early Diesel Fast Glow Plug

Upgrade to better glow plugs for 1969 to 1979 220D 240D and 300D

New German made fast heat glow plug designed to replace the series loop tip style glow plugs that were installed in all non-turbo diesel engines up to 1979. These have the large thread built in so they will install directly into the older heads.

On Demand Video
$4.99

Waking Up An Old Benz That Has Sat For Years Part 1 - On Demand Video

Kent covers what you may have to do first with the engine and fuel system

When an old Mercedes ( or any other car for that matter ) has sat idle for over a year it can be a challenge to get it safely back on the road again. If it has sat idle for more than 5 years you may find it difficult to even get the engine running. 

$135.00

190SL and PONTON 220S NOS Fuel Pump Rebuild Kit w/ Used Pump Parts

Repair kit # 000 586 00 09 - with spare pump parts as shown below

\The repair kit shown is new old stock. The new diaphragm is soft and flexible from the box. I am including my old extra fuel pump parts, as I don't think I will be restoring another 190 SL or 220 S.

$19.75

V-Belt Pulley Rust Removal Kit

Save your new belts - this way is fast! - electric drill required

Kent tried a bunch of methods, but using an electric drill with these round brushes and extension proved to be the fastest and most efficient way to get the rust off those old pulleys that have sat for a long time. Hand wire brushing does not work, and hand sanding takes a long time.

$26.85

Deluxe Exhaust System Rubber Hanger Assortment - 12 pc.

How many times have you wished you had the right size donut? Kent solved his own frustration. Watch the video below.

Exhaust hangers are not created equal. Sometimes you need long donuts, sometimes you need softer, and sometimes to need a smaller rubber hanger. CHECK the different sizes below:

PDF
$6.99

Diesel Valve Adjustment Procedures - PDF Download

Instructions for 1961 to 1985 4 and 5-cylinder diesels with an overhead camshaft - excluding the 1984 and 1985 190D

To read or download in a 2-up format. Kent will walk you through the steps of adjusting the valve clearances on your older 190D, 200D, 220D, 240D, 300D, 300CD, 300TD, and 300SD. This procedure should be done every 12,000 miles. Two special wrenches are required.

$4.75

All Models Radiator Hose Chafe Protector - Heavy Duty

Don't let a hose rub up against the engine or radiator. Easy install with zip ties included if needed.

This is a great solution to what is sometimes a nagging problem. This heavy duty and flexible and adjustable plastic spacer can be put on the top or bottom radiator to prevent chafing in and area where it might come in contact the the engine or the radiator.

$21.95

40 Piece Silicone End Cap and Plug Set - Amazing Uses!

Push them over a hose and they act like a sealing end cap. Turn them around and push into a hole to act as a plug. Cut in half - use one piece for a splice between hoses.

We starting using some of these to plug brake lines while changing out calipers. Then we started using them on fuel and oil hoses. Now we are using them all over the place and keep finding new uses for them on a monthly basis. These are a MUST HAVE! Watch the video below to become a believer!

On Demand Video
$18.99

How to Do a Compression Test on Your Gas Engine - On Demand Video

Example showing 450V8 engine but same principles apply to all gas engines 1960 through the mid 1990s

In this 28-minute instructional video Kent with show you how to do a compression test on your own Mercedes gas engine and explain how to interpret the results. It is very important you do this procedure BEFORE "throwing" parts at your engine trying to fix a performance problem.

$49.50

Gas Engine Compression Test Kit with Video Instructions

MOST IMPORTANT STE[P when doing an engine physical exam. Applies to all gasoline Mercedes passenger car engines from the 1950's through the 1990's - Free extra video and supplies included.

Doing a compression test is one of the best ways to determine the internal health of your gas engine. This is a primary test for doing a physical examination.  You want to do this on any old Benz before spending a lot of money to get the engine running right or before restoring your car.

On Demand Video
$3.99

Spark Plug Do-It-Right Installation and Cleaning Tips - On Demand Video

These instructions will apply to all gasoline engines that use standard sized spark plugs.

You might be surprised to realize you spark plug holes need cleaning - and yes some REALLY need cleaning! This 5-minute video will demonstrate Kent's method of cleaning the threads in the cylinder.

On Demand Video
$7.99

Cleaning and Polishing Your Aluminum Valve Cover to Look Factory Fresh - On-demand Video

This video will show you how to get the original look - not the highly polished look when using a polishing compound

PLEASE read the instructions below carefully on how you will view this video.  It is NOT downloaded to your computer and viewing is NOT automatic. You must be logged in at Mercedessource.com and you MUST click on "my account".

$22.00

All Models Rubber Exhaust Hanger (Donut) Easy Install Tool w/ 4 Hangers

4 "Donuts" included. After 20 years of scraped knuckles... FINALLY a good solution that makes install a "snap."

Hard to believe we took so long to come up with this tool. It was Gerson's genius that made it happen. The secret turned out to be the hook that keeps the tool in place while stretching out the rubber donut. Wow! What a cool tool.

$92.50

Mercedes Early Gas Engine Custom Valve Spring Compressor / Valve Adjusting Tool

Custom modified and reinforced in our shop for 4, 6 and 8 cylinder engines M129, M130, M180, M114, M115, M116 and M117

If you own one of the early Mercedes overhead camshaft engines from the mid-1950's up to the mid-1970s that have mechanical (non-self-adjusting) lifters this is a MUST HAVE tool! It does NOT work on the M110 twin cam engine.

$78.50

Older Diesel Internal Engine Cleansing Kit

Must be done using separate fuel tank. Cleans injection pump, fuel injectors, pre chambers, combustion chambers and helps reseal piston rings. Will not work on extremely worn out engines.

UPS ground shipping only. Can not be shipped internationally. Rather than try to explain what this kit does and how it does it we are going to ask you to watch the video below if you have not already done so.

On Demand Video
$12.99

Super Extreme Engine Compartment Detailing - On Demand Video

This is over the top detailing. Watch Kent perform magic on his 560SEC engine compartment. 45 minute long instructional video

Want to try to make your car's engine and engine compartment look like it just came off the showroom? Would you like detailed information on the chemicals, brushes, tools, and procedures Kent uses to get his engine compartments looking so nice?

On Demand Video
$6.99

Solving Early 6 Cylinder Gas Engine Valve Adjustment Problems - On Demand Video

Tools and tips needed when adjusting the valves on 1955 to 1972 single overhead cam engines

Valve adjustment is often neglected on many of the mid 1950's to early 1970's 6 cylinder single overhead camshaft gas engines.  If it has been years since any adjustment was made, there will be problems - Kent can guarantee it!!!

PDF
$8.95

Why Does My Diesel Engine Run So Badly? by Kent Bergsma - Download

Diagnosing poor power, horrible fuel economy, rough running and excess exhaust smoke

Running badly means poor performance. It happens sooner or later to EVERY diesel owner. The word "performance" is often used to describe how well a diesel engine runs once started. The principles discussed will cover all Mercedes diesels from the mid 1950s to the mid 1990s.

$12.75

Very High Temp Engine Sealing Compound

Elring Dirko brand Permanently Elastic; 85g Tube - Rated to 600 F

Dirko sealing compound is permanently elastic, cold vulcanizing, silicone-rubber based. Can be used for connecting joints, cylinder head, crankcase, oil sump, timing case, thermostat, water pump, transmission, axles, differential, radiator, chassis.

$39.60

High Visibility Easy Adjust Click-Stop 3/8 Inch Drive Torque Wrench and Case

Perfect size for torquing spark plugs and other under 50 ft. lbs. important engine components.

This is a huge improvement over the older torque wrenches that I have seen around for years. I know it is a little more expensive, but after you use it, you will agree it is well worth the money. It is perfect for spark plugs and mid-size fasteners around the engine.

$9.95

Engine and Component Assembly Lube

Lubro Moly Brand

High quality lubricant to be used when assembling bearings in engines or in components that are oiled by engine oil. This WILL prevent scoring and wear upon initial start-up after overhaul.

$13.95

Lubro Moly Motor Oil Saver - For Diesel and Gasoline engines

UPS GROUND SHIPPING ONLY!

Another High Quality product from Lubro Moly. This is a 300ml can of Motor Oil Saver. It Rejuvenates rubber and plastic engine seals and reduces oil consumption via the piston rings and valve guides; counteracts the loss in viscosity of motor oils.

$13.50

Diesel Purge - Per Can

Can only be shipped UPS ground

PLEASE NOTE: This item can ONLY be shipped UPS Ground. Diesel purge is amazing stuff! It is getting so popular that we have decided to offer it on the website individually, so now you can buy per can.

Sale
$18.25

Radiator and Heater Hose Pick Removal Tool SET

Use all all vehicles to "unstick" old rubber coolant hoses. These have the best angles!

If you plan to change coolant hoses this is a must-have labor-saving tool. These are cleverly designed tools. I could not have done it better myself. I actually use to make a couple of different types before I found this set.

Anaerobic gasket maker
$19.50

Anaerobic Flange Gasket Maker - The Best

For metal to metal sealant where there in no gasket

FITS THE FOLLOWING: All models PON, FIN, P55, 110, 111, 112, 113, 108, 109, 114, 115, 107, 116, 123, 124, 126, and 201 chassis. Here is my all time favorite gasket maker and sealant. You may already know how I feel about RTV silicone products (I think they should be outlawed!).