W126 Suspension Guide Rod Mount Bracket FRONT Rubber Bushing
This rubber part fits all W126 sedans and SEC coupes from 1980 to 1991.
Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
This rubber part fits all W126 sedans and SEC coupes from 1980 to 1991.
Want the best, fastest, and easiest way to polish faded anodized aluminum trim, to remove fine scratches from your glass, to loosen rusted and stuck fittings and bolts, and to sand rust out of tight places? - enter the multitool or multi-function tool.
For a number of maintenance operations, you need to be able to turn the engine over by hand. This includes valve adjustment, timing chain replacement, injection pump timing on diesel engines, checking and setting internal engine timing, draining the torque converter, and others.
This is the part that more often than not gets lost when the SLS pump is removed from an engine for a long period of time. If you are trying to return the system to original after someone has removed the pump you most likely will need this part.
This is a full 25-minute step-by-step instructional video on how to properly flush or bleed your brake system using our pressure brake bleeder and fluid capture tank.
If you already have a multi-function tool or you plan to buy either our glass or anodized aluminum polish kit ( see below ) you really don't need a second tool unless you want to dedicate one just for "banging" on rusty fittings and bolts. We offer this same kit with the tool included.
In this video, Kent explains the correct procedure for cleaning and lubricating your hubs and rear brake rotor BEFORE you install your wheels. He hardly ever sees this done when removing wheels on 15 plus-year-old Mercedes so he knows it is almost ALWAYS neglected.
This tank works amazing! Put in the heavy rear end or trans fluid. Pump up the pressure. Stick the non-fall-out end in to fill hole... and just push on the valve in the handle of the filling wand.
Kent came up with this kit because of all the times he replaced e-brake shoes only to end up with battered knuckles and extreme headaches. This video is included free with the purchase of the toolkit.
This video is intended to be used as instructions when purchasing Kent's Rust Buster Tool. It can be viewed separately but you will need the tool to apply the principles. This video is included free of charge when purchasing the tool. See related products below:
Have you dreaded changing the rear end fluid before because it is a pain and ends up being really "messy?" Kent finally decided there had to be a better way so he went to work and came up with the idea of using a simple and affordable custom made pressure tank to "flush" and refill differentials
This video will take all the "mystery" away... For all W116, W123, and W126 Turbo Diesel 5
One day Kent "finally had it!" Replacing parking brake shoes was always a dreaded job. As he thought about it he realized the frustration was mostly due to the hassle of getting all the holding springs on and off. So he set out to develop a new tool.
These are Kent's favorites. As shown in this video on youtube. Pack of 5 shipped.
Fits the following: All 5 cylinder diesel engines from 1975 to 1985. For 300D 300TD 300CD 300SD, PDF instructions included. This is the critical inside wear part of the injector that delivers the fuel spray into the cylinder. These are direct replacement new fuel injector nozzles from Bosch.
Maybe you have even tried this only to have to patch fall on the floor when you walk away... ( it has happened to Kent... :-) ).
If you own a Mercedes with the M116 V8 engine (expect 1980 to 1982 380 engines with single low chains) timing chain failure can really ruin your day! If the engine it turning at high speed when this happens, it can destroy the engine.
If you own a Mercedes with the M117 V8 engine timing chain failure can really ruin your day! If the engine it turning at high speed when this happens, it can destroy the engine. If it happens at low speed, you may get away with removing the heads and replacing some bent valves.
PLEASE NOTE: These are not complete instructions on how to open up an early style SLS pump and properly reseal it. Rather, these are some tips that will make the job go faster and easier. These are things Kent has learned rebuilding a number of these pumps himself.
PLEASE NOTE: This is NOT a complete instructional video on how to install a new timing chain in a 1970 to 1991 M116 or M117 Mercedes V8 engine. Rather it is a collection of "tips" to help you prevent running into trouble when doing this job yourself.
For all 3.5, 3.8, and 4.2 liter V8 engines from 1969 to 1991 280SE 3.5, 300SEL 3.5, 380SE, 380SEC, 380SEL, 380SL and 420SEL. These THREE are the upper (and easily accessible) plastic guide rails that most often break due to age and heat.
This can happen when you least expect it! It happened to me right when I purchased a W109 300SEL and it can be really frustrating.
For all 4.5, 5.0 and 5.6 liter V8 engines from 1972 to 1991 (excluding the W140 500SEL).
This super fine cloth along with Miracle Paint can really do some fine rust repair detailing. You can use it on a rough pitted area that you want to smooth out. Put on a couple layers of cloth and coat with Miracle Paint. Let dry and block sand.
This is a must-have if you have a prized Benz or any car you don't drive often!! If you let any of your cars sit for long periods ( generally over 30 days) without driving them, you can ruin your battery, especially if you let it go completely dead.
If you are a 1969 to 1991 V8 you should have some extras of these on hand. They are inexpensive and should be replaced anytime you remove your valve covers. The gaskets will keep a good seal longer than the bolt washers.
These will fit all 1976 to 1991 4.5, 3.8, 5.0 and 5.6-liter V8 engines with Bosch C.I.S fuel injection. PLEASE NOTE: These spark plugs have an aluminum end cap that does screw off. You will receive the plugs with the end cap installed.
One of the most often neglected easy and inexpensive maintenance items I see on gas engines. Why do people think that spark plugs will last forever or that it doesn't matter what type of plug is used! Aren' they all created equal?
This is a VERY common maintenance item on the older Mercedes V8 engines. If they are too old they will leak. If they are not put on properly they will leak. If you do any maintenance (ie, valve adjustment, clip replacement, timing chain, guides, etc), you should have this kit on hand.
You can not believe how many problems Kent has seen over the years as a result of the camshaft oiler tube falling off inside the valve cover! It is held on by inexpensive small plastic clips and guess what happens after 15 to 20 years? Yes, that is correct.
Kent will show you the proper way to remove and replace a V8 valve cover gasket so you won't have oil leaks after installing a new one. This is a common maintenance item.
This long bolt washer are is available new. When replacing the Brake Control Rod Ball Joint Bushing on the W126 chassis this long bolt has to be removed. If severely rusty you may have to cut off with saws all. The long bolt is not included in the repair parts kit.
I do not need to say much about this tool. Well made and well thought out. Someone who obviously was frustrated at scratching the finish on his or her alloy wheels came up with this idea. Watch the video below to see why this is now my favorite go it 17 mm lug bolt socket.
This is a BIG problem! Failure to fix it can shorten engine life by allowing dirt to enter the combustion chambers thus damaging the piston rings which lead to low compression, poor fuel economy, hard starting, high oil consumption and loss of power.
Works on W114, W115, R107, W116, W123 and W126. A better performing and more comfortable 14mm hex wrench to use when changing the fluid in your rear end. Will work on manual transmission with 14mm drain plug only. Watch the video to see why.
These are the instructions that come with our black engine and chassis paint restoration kit, but they will help you successfully spray paint almost anythings. These step-by-step techniques were developed by Kent over almost 60 years of spray painting cars and parts.
UPS GROUND ONLY: This is the best spray can paint Kent has found to detail the semi-gloss black parts on your Benz. It is not easy to find a good spray can paint!
2 large style clamps to be used on upper and lower radiator hoses. Use these to replace your thermostat or water pump without having to drain all your coolant out of the radiator. Works on medium size coolant hoses also.
Kent will explain the theory of operation in simple terms, why it is so important for proper transmission shifting performance, and how to test it hooked up to the engine's vacuum system with the engine running.
This on-demand training video will walk you through the steps you need to follow in order to get your headliner panel off so you can work on the sunroof. If your sunroof won't open, you are stuck - right? Not SO according to Kent.
If you have been enjoying Kent's free Youtube videos but have not yet purchased and watched one of his on-demand "meat and potatoes" videos, we guarantee you are really missing something.
Good used plug and wire as shown for the AC compressor. Will need to be spiced into your original wiring.
Free PDF written instructions included. Only fits 126 Chassis gasoline 6 and 8 cylinder 1981 to 1989 - See model list below
This video will show you to details on how to use Kent's custom rear end and manual transmission drain plug wrench. These 14 mm plugs were used on almost all manual transmission and rear ends from the early 1960's up to the mid 2000's.
This is the best tool to use when installing or removing the Monark hand primer pump. PLEASE NOTE. This is 19mm and will NOT work on the Bosch hand primer pump or other style pumps (most others are 17 mm).
In this video instruction Kent will show you how he installs our battery tender kit in a W124 Mercedes.
This is a brand new Genuine Mercedes check valve for the fuel injection pump on 4 and 5 cylinder diesels 1977 to 1985. 2 new copper sealing rings are included. This valve is mounted on inside of pump in the fuel line going to the filter.
For these old 6 cylinder gas engines of the late 80's and early 90's Kent feels this part along with the injector o-ring seals could be one of the most overlooked maintenance items on these engines.
For these old 6 cylinder gas engines of the late 80's and early 90's Kent feels injector seals are one of the most overlooked maintenance items on these engines.