Search | Specialty Tools | R107

This is one of Kent's favorite tools around his shop. It is used almost daily. The tool rose out of a need to be able to safely hold fuel inectors while cleaning when with a large high speed wire wheel. No tool like this is availabe so it had to be built in our shop!

Works on all models from 1977 to 1993 with the Bosch C.I.S Fuel Injection system - see models listed below: Now you can do it yourself on the bench with this inexpensive tester- Save big $$.  Ever wonder how well your old CIS fuel injectors are working?

If you have ever tried to remove and reinstall a shift rod attachment clip under your Benz you know how frustrating it can be.

You will receive two specialty drill bits and a modified star socket, along with very detailed video instructions on how to use these tools to remove a damaged head hex bolt without damaging the door frame or the old striker.

When pressure testing your KE-jetronic fuel injection,  you may find you need a really thin wrench to install the small fitting on the right side bottom of the fuel distributor.

Nice to have a few extra 13mm sockets around. This is the first tool that gets lost when working on old Mercedes. The tall shoulder inside helps to hold the nut or bolt in a position to make it easier to start the threads.

Planning to replace the head gaskets on your older v8 engine. You should have this tool on hand before you start. You don't think so? Watch the video and then decide.

Valve clearance adjustment should be done every 10,000 to 12,000 miles. Recently emails started coming in - "we can not find any valve adjustment tools for our earlyV8 - help!" Most companies are currently noting the old factory-style tools are no longer being manufactured, so we went to work to

This socket is the correct size to use with our R107 Fuel Tank Screen Removal Tool ( See below:). It is a heavy-walled 27 mm black impact grade socket made in the U.S.A.

For many years, we were receiving frantic requests from customers asking for help with removing the fuel tank filter screen from their 1971 to 1989 350SL, 450SL, 380SL, 500SL, or 560SL (the same issue also applies to all SLC coupes).  Until recently, we did not have a solution other than to tell

On a regular basis, Kent and Gerson custom make tools to make certain jobs go easier and faster. So is the case with this long reach ratchet. It was developed to get glow plugs out of the older diesel engines without having to remove the hard lines.

Want the best, fastest, and easiest way to polish faded anodized aluminum trim, to remove fine scratches from your glass, to loosen rusted and stuck fittings and bolts, and to sand rust out of tight places? - enter the multitool or multi-function tool.

If you already have a multi-function tool or you plan to buy either our glass or anodized aluminum polish kit ( see below ) you really don't need a second tool unless you want to dedicate one just for "banging" on rusty fittings and bolts. We offer this same kit with the tool included.

One day Kent "finally had it!" Replacing parking brake shoes was always a dreaded job. As he thought about it he realized the frustration was mostly due to the hassle of getting all the holding springs on and off. So he set out to develop a new tool.

I do not need to say much about this tool. Well made and well thought out. Someone who obviously was frustrated at scratching the finish on his or her alloy wheels came up with this idea. Watch the video below to see why this is now my favorite go it 17 mm lug bolt socket.

This U.S.A. made 17 mm 8 inch long combination wrench is custom modified here in our shop to help you easily install Bilstein front and rear shocks on most of the older model Mercedes Benz.

Have you ever tried to get those old stuck pad sensors off your front calipers? Have you had much success doing it without damaging at least one wire? Kent has had the same frustration over the years so finally designed a custom tool for the job.

This set of 5 pick tools have very thin and sharp points. Best set Kent has found to remove orings in hard to get to locations. The variety of angles available allows you to get into almost anywhere to remove and o-ring, sealing ring or other small part.

Long drive pin punches are very handy when working on your Benz. The smaller size in this set is particularly helpful when removing and replacing twin pin style brake pads. All steel. Made in India. Pin sizes: 1/8'', 3/16'', 1/4'', 5/16'' and 3/8''