U.S.A Made Quality 8mm Hex Socket ( 3/8 inch Drive )
Many uses for this quality hard steel tool including removing W123 and early W126 motor mount bolts.
Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
Many uses for this quality hard steel tool including removing W123 and early W126 motor mount bolts.
On a regular basis, Kent and Gerson custom make tools to make certain jobs go easier and faster. So is the case with this long reach ratchet. It was developed to get glow plugs out of the older diesel engines without having to remove the hard lines.
You will receive two (2) five liter bottles more than enough to do a full oil change on any vehicle:
This video will not only save the condition of your door panel, but it will save you a lot of time and frustration when you go to replace a door panel after doing maintenance inside your door. Those old plastic film liners always seem to be torn, ripped, and downright ugly.
We know that many of you own multiple Mercedes, including both gas and diesel models. If you own one of Kent’s fuel injector pressure testers you no doubt will want to test all your applicable mechanical fuel injectors in both types of older engines.
In this short video, Kent will give you an overview on setting up and using Version 3 of his bench mount CIS gasoline injector pressure tester.
This is one set that will pretty much do it all: door panels, radio, windows, interior trim, exterior trim, engine, fastener plugs, seals, etc. Strong enough to even change a bicycle tire...
For newer Mercedes, you will be hard pressed to remove some of the fasteners without this socket set, especially around the engine. This is one of the higher quality sets we have seen.
These are O.E. Bilstein shocks. They will fit all R129s (except the V12) from 1990 to 2002. Includes the 300SL 500SL SL320 and SL500. Hardware as shown below is included with each shock. ( x2)
This is the very best hose Kent has found to use to install spark plugs in restricted spaces. Watch the video below and he will demonstrate.
Keeping your throttle linkage ball sockets and pivot points lubricated extends the life of the parts and maintains top performance for the engine as well as some of the later transmissions.
This video will show Kent's technique on how to prime and paint alloy wheels using our wheel paint kit and masking dam that we sell separately. See below. The techniques will also apply to any spray can paint you should choose to use.
Want the best, fastest, and easiest way to polish faded anodized aluminum trim, to remove fine scratches from your glass, to loosen rusted and stuck fittings and bolts, and to sand rust out of tight places? - enter the multitool or multi-function tool.
This is a full 25-minute step-by-step instructional video on how to properly flush or bleed your brake system using our pressure brake bleeder and fluid capture tank.
If you already have a multi-function tool or you plan to buy either our glass or anodized aluminum polish kit ( see below ) you really don't need a second tool unless you want to dedicate one just for "banging" on rusty fittings and bolts. We offer this same kit with the tool included.
In this video, Kent explains the correct procedure for cleaning and lubricating your hubs and rear brake rotor BEFORE you install your wheels. He hardly ever sees this done when removing wheels on 15 plus-year-old Mercedes so he knows it is almost ALWAYS neglected.
This tank works amazing! Put in the heavy rear end or trans fluid. Pump up the pressure. Stick the non-fall-out end in to fill hole... and just push on the valve in the handle of the filling wand.
Kent came up with this kit because of all the times he replaced e-brake shoes only to end up with battered knuckles and extreme headaches. This video is included free with the purchase of the toolkit.
This video is intended to be used as instructions when purchasing Kent's Rust Buster Tool. It can be viewed separately but you will need the tool to apply the principles. This video is included free of charge when purchasing the tool. See related products below:
Have you dreaded changing the rear end fluid before because it is a pain and ends up being really "messy?" Kent finally decided there had to be a better way so he went to work and came up with the idea of using a simple and affordable custom made pressure tank to "flush" and refill differentials
These are Kent's favorites. As shown in this video on youtube. Pack of 5 shipped.
Maybe you have even tried this only to have to patch fall on the floor when you walk away... ( it has happened to Kent... :-) ).
This super fine cloth along with Miracle Paint can really do some fine rust repair detailing. You can use it on a rough pitted area that you want to smooth out. Put on a couple layers of cloth and coat with Miracle Paint. Let dry and block sand.
This is a must-have if you have a prized Benz or any car you don't drive often!! If you let any of your cars sit for long periods ( generally over 30 days) without driving them, you can ruin your battery, especially if you let it go completely dead.
I do not need to say much about this tool. Well made and well thought out. Someone who obviously was frustrated at scratching the finish on his or her alloy wheels came up with this idea. Watch the video below to see why this is now my favorite go it 17 mm lug bolt socket.
Works on W114, W115, R107, W116, W123 and W126. A better performing and more comfortable 14mm hex wrench to use when changing the fluid in your rear end. Will work on manual transmission with 14mm drain plug only. Watch the video to see why.
These are the instructions that come with our black engine and chassis paint restoration kit, but they will help you successfully spray paint almost anythings. These step-by-step techniques were developed by Kent over almost 60 years of spray painting cars and parts.
UPS GROUND ONLY: This is the best spray can paint Kent has found to detail the semi-gloss black parts on your Benz. It is not easy to find a good spray can paint!
2 large style clamps to be used on upper and lower radiator hoses. Use these to replace your thermostat or water pump without having to drain all your coolant out of the radiator. Works on medium size coolant hoses also.
This on-demand training video will walk you through the steps you need to follow in order to get your headliner panel off so you can work on the sunroof. If your sunroof won't open, you are stuck - right? Not SO according to Kent.
If you have been enjoying Kent's free Youtube videos but have not yet purchased and watched one of his on-demand "meat and potatoes" videos, we guarantee you are really missing something.
This video will show you to details on how to use Kent's custom rear end and manual transmission drain plug wrench. These 14 mm plugs were used on almost all manual transmission and rear ends from the early 1960's up to the mid 2000's.
This is PART 3 of Kent’s three part video series on troubleshooting and repairing a very common shifting problem in the 1996 to 2006 Mercedes 722.6 five (5) speed automatic transmission.
This is PART 2 of Kent’s three part video series on troubleshooting and repairing a very common shifting problem in the 1996 to 2006 Mercedes 722.6 five (5) speed automatic transmission.
This is PART 1 of Kent’s three part video series on troubleshooting and repairing a very common shifting problem in the 1996 to 2006 Mercedes 722.6 five (5) speed automatic transmission. The entire video series is included free of charge when
This gasket set includes the complete valve cover rubber seals as well as the 12 rubber seals for the bolts. If you are going to change the valve cover gasket you will need to replace the bolt seals as well or you will regret it!
In this video instruction Kent will show you how he installs our battery tender kit in a W124 Mercedes.
In this video instruction Kent will walk you through the steps of how to successfully replace a leaking valve cover gasket on an M104 straight 6 gas engine. Special emphasis will be placed on proper preparation and cleaning, thread inspection and proper torquing sequence.
This 24 minute on demand training video comes with our injector back flush cleaning kit. You can purchase this video separately, but please keep in mind you will not have any of the tools or supplies to complete this procedure yourself.
With these old gas fuel injectors, sometimes you just have to "back flush" the insides to restore them to peak performance. There is no guarantee that back flush cleaning will restore every old gasoline mechanical fuel injector. Some are just plain worn out.
DOES NOT INCLUDE HOOD PAD --- This special glue is very hard to obtain and has doubled in price since 2021 when it could not be found. This kit includes everything you will need to successfully install a new foam hood pad in your older Mercedes.
If your shift lever feels loose or is rattling, that is an almost sure sign that one or both bushings on the transmission shifting levers has/have disintegrated and fallen out. This new replacement bushing is cheap, but we need to warn you about installing it.
If your shift lever feels loose or is rattling, that is an almost sure sign that a bushing (or both)on the transmission shifting lever or the console shifter has disintegrated and fallen out.
In this video instruction, Kent will demonstrate how to check for one possible source of a mysterious front end clunking sound. Any clunking noise you hear when driving over rough ground or when braking should be investigated immediately.
After years of "fighting" fuse replacement, Kent finally decided he had had enough! And so was born another special tool. It is designed to securely grab hold of a ceramic fuse, remove it from it, and replace it with minimal exertion and no damage.
Trying to fix a rough or bouncy ride in your SLS Mercedes? Not sure what is causing the problem? Maybe you have heard that it might be the accumulators.
These are the instructions that come with Kent's brake pad and brake caliper service kit. It is possible to make your own service kit by watching this video. To purchase the kit see related products below. To learn more about the importance of this kit watch the video below:
Brakes are one of the most often neglected maintenance items on older cars. This is not just related to Mercedes Benz. Most owners don’t realize that brakes need special attention and service not only when pads are changed but every 2 years.
This is a collection of SPECIAL tools Kent has put together to help you grab, twist, and pull on things in and around your Mercedes. He makes each one of these tools right here in his shop.
This video instruction will walk you through the step-by-step procedure of how to do a "service" on your power steering system.