Search | brake video

Displaying 1 - 50 of 113
$69.75

Pressure Brake Bleeder

*Note: this pressure tank can now perform a cooling system pressure leak test as well . Kent's 2-in-1 invention. See below to purchase the pressure testing cap.

When used for bleeding or flushing your brake system, a single person can do a rapid fluid flush!  No mess and very efficient. Will work on all Mercedes from 1968 to 1995 - Also select 1960's models and most later chassis up to 2006 see list below: 25-minute video instructions are now included.

On Demand Video
Mercedes Brake Caliper Removal - On Demand Video
$6.99

Brake Caliper Rebuilding Part 1: How to Remove Frozen Pistons From Brake Calipers - On Demand Video

Part 1 of 3 Parts: For Mercedes brake calipers from the early 1960's to the late 1990's

You can save a lot of money if you can rebuild your old brake calipers, especially on some older models. If you can just get the pistons out of the housings, most calipers are rebuildable, unless they have been subject to road salt or have sat exposed to the weather for years without use.

On Demand Video
$19.99

Using Our Pressure Brake Bleeder and Capture Tank - On Demand Video

Kent walks you through a full brake fluid flush on a W126 Mercedes showing all the tips and tricks to do it right yourself.

This is a full 25-minute step-by-step instructional video on how to properly flush or bleed your brake system using our pressure brake bleeder and fluid capture tank.

$38.75

3 in I Emergency Brake Install Tool w/ Extras Including Video Instructions

*This will SAVE time and reduce frustration Tool handle revision 8/5/23: This is a must-have tool if you are replacing emergency / parking brake shoes!

One day Kent "finally had it!" Replacing parking brake shoes was always a dreaded job. As he thought about it he realized the frustration was mostly due to the hassle of getting all the holding springs on and off. So he set out to develop a new tool.

$36.75

Brake Pad and Brake Caliper Service Kit - For Long Pad and Rotor Life

*You MUST exercise those caliper pistons and lube those pads! Use when changing pads or at your regular every 2 year brake system service

Brakes are one of the most often neglected maintenance items on older cars. This is not just related to Mercedes Benz. Most owners don’t realize that brakes need special attention and service not only when pads are changed but every 2 years.

On Demand Video
$8.99

Brake Pad and Caliper Service Instructions - On Demand Video

Kent demonstrates his recommended 2 year brake pad and caliper inspection and service procedures - applies also when installing new brake pads!

These are the instructions that come with Kent's brake pad and brake caliper service kit. It is possible to make your own service kit by watching this video. To purchase the kit see related products below. To learn more about the importance of this kit watch the video below:

$19.95

Pentosin DOT4 Brake Fluid - One Liter

*Higher Performance Fluid - direct replacement for DOT 3 - All Models

WARNING: Can only ship inside the USA via UPS GROUND. If you have other items in your cart do not choose expedited shipping or US postal service! High Performance low moisture absorbing DOT brake fluid.

PDF
$12.50

MBZ Brake Systems Complete Repair Manual - PDF Download

Covers 1965-1995 Mercedes Benz Brake Component Replacement with 4-wheel disc brakes. DOES NOT COVER DRUM BRAKES.

This manual is a complete guide for all brake component replacement for all 1965-1995 Mercedes Benz cars. It will help you identify common signs of trouble, inspecting brake components, and replacing major brake components - a necessity for any DIY brake job on your Mercedes Benz!

$19.50

Brake Systems Troubleshooting Inspection and Repair by Kent Bergsma

PRINTING MANUAL AGAIN AS OF JULY 2025!

Covers 1965 to 1995 110, 111, 112, 108, 109, 107, 114, 115, 116, 123, 126, 201, 124, and 129 Chassis master cylinder, pads, rotors, calipers and flexible brake hoses. Only covers models with 4-wheel disk brakes. DOES NOT COVER drum brake repair. 

On Demand Video
$15.99

Emergency / Parking Brake Shoe Installation w/ Ease - On Demand Video

Requires Kent's special tool to take the pain out of this job! These are the instructions only.

Kent came up with this kit because of all the times he replaced e-brake shoes only to end up with battered knuckles and extreme headaches. This video is included free with the purchase of the toolkit.

$22.95

Brake Master Cylinder Air Bleeding Kit with FULL Video Instructions

*This bleeder kit is primarily for bench bleeding in a vise but can also be used to bleed an air-locked master cylinder on the car. Custom wrench included.

This procedure is necessary when you install a new master cylinder or allow fluid to completely leak out of your master cylinder.

$62.50

1968 to 1991 Parking Brake Shoe Repair Kit with Installation PDF Instructions

Does not fit all models. See notes below. Inspect these shoes if you have not - they are hiding inside the rear brake discs!

Emergency brake shoe maintenance is often neglected because the rear brake disc / rotor has to be removed to inspect and repair them. If the car has ever been driven a long distance with the emergency brake on, expect problems.

$89.50

1968 to 1991 Most Models Parking Brake Shoe Replacement Kit with Extras

*Kent's special tool and video instructions included. See applicable chassis and model list below BEFORE ordering.

Emergency brake shoe maintenance is often neglected because the rear brake disc / rotor has to be removed to inspect and repair them. If the car has ever been driven a long distance with the emergency brake on, expect problems.

$30.00

Do-It-Right DIY Brake Repair Accessory Kit

*You want your brake job done right with results that will last and prevent future brake squeal, brake shimmy, and poor pedal response? This is what you need!

Whether your just changing pads, hoses, or doing a complete brake system overhaul, the items we include in this DIY will guarantee the job gets done with no mistakes, minimum frustration, and lasting results. There is no other kit like this anywhere.

On Demand Video
Mercedes Front Rotor Removal - On Demand Video
$3.99

Removing the Front Brake Rotor from the Bearing Hub - On Demand Video

Kent will show you some tips on how to remove and replace that front rotor on the older model front hubs

Installing new front rotors on older model Mercedes requires that you remove the rotor from the bearing hub and bolt the new rotor back on. Sounds easy right? Sometimes not! The bolts are on very tight and often take a lot of torque to remove. How do you hold the break rotor while doing this?

$7.95

107 116 123 126 Front Brake Pad Wear Sensor wires x 4

Plan to have to change these every time you change pads. Even if they look good they often break upon removal.

Fits the Following: All 107,116,123 and 126 Chassis from 1973-1991. PLEASE NOTE. These do not work on the W201 or the W124 chassis. 

$107.85

Complete Pressure Brake Bleeding and Flushing Kit w/ Instructions

*For use on most Mercedes from 1968 to 2004(6) See List - UPS Ground Shipping ONLY! - 25 minute Video instructions now included

For use on most Mercedes from 1969 to 2006 (see exceptions below)- UPS Ground Shipping ONLY! Buy the complete kit and save $$. This is almost everything you need to do a fast, clean and efficient brake fluid flush on your older Mercedes Benz passenger car.

PDF
$9.75

Brake Bleeding Equipment and Procedures by Kent Bergsma - Download

Applies to all models and chassis listed below:

This 12 page instructional downloadable booklet by Kent Bergsma covers brake bleeding equipment and procedures for all model Mercedes from the mid 1950s to the mid 1990s. This covers chassis Ponton 110 111 112 113 108 109 114 115 116 107 116 123 126 201 and 124.

$39.80

W163 ML Ceramic Front Brake Pad Set with Hardware

Posi-quiet feature with reduced brake pad dust. For ML320 ML430 and ML500 (First generation ML only)

You will love the quiet, solid braking with these pads and the lack of dirty-looking wheels after a long road trip

$32.50

Frozen Brake Caliper Piston Removal Pump Adapter Hose

Only works with Mercedessource Injector Pressure Tester - FREE VIDEO INSTRUCTIONS

This is a must-have if you attempting a caliper rebuild on one with stuck pistons. If you own one of our injector pressure testers here is a great add-on that will allow you to use the tester to remove stuck pistons from old brake calipers.

$92.25

W163 ML Pressure Brake Bleeding Kit w/ Instructions

For ML320 ML430 and ML500

This is the absolute best way to bleed the brakes or flush your brake fluid on your older ML. Comes wth you pressure brake bleeder, correct cap for the fluid reservoir, fluid capture bottle, and Kent's video instructions. Bonus: 3 pairs of nitrile gloves included.

$69.00
Currently out of stock.

BREMBO 1977 TO 1991 Select Models Premium Ceramic Front Brake Pads - Full Set of 4 Pads

Kent's favorite pads: Fits 1977 to 1985 W123 DIESELS, all 1979 to 1985 R107, and all 1981 to 1991 W126 models (both coupes and sedans). If you are not sure of your model application please email BEFORE ordering.

PLEASE NOTE THESE ARE 17 mm THICK 

You want superior stopping performance as well as minimum brake dust on your wheels - then these pads are what you want. Watch the video below - they are also really pretty!  :-)

123 126 Rear Brake hose set
$32.50

EARLY 107 116 123 126 Chassis Meyle Rear Brake Hose Set

Here is a brand new set of Rear brake hoses for all 123 chassis 1977-1985 and 126 chassis 1981-1991, both gasoline and diesel models and 116 Chassis 300SD only, and 1973 to 1980 450SL.  Also fits 380SL from 1981 to 1985 -- US MODELS ONLY

$24.50

Flexible Brake Hose Installation Kit 1968 to 1991

Includes 9x11 mm flare nut brake line wrench, thread sealant and PDF instructions

Fits 107 115 116 123 and 126 Chassis. This "must have" kit will help you replace the rubber flexible brake hoses on your older Mercedes from the late 60s up through the late 80s.

$240.00

W123 Front Brake Calipers Loaded with Hoses - Near New

Fits all 123 1977 to 1985 240D 300D 300CD 280E 280CE and 300TD wagons

These parts were only on a W123 for a little over a year and less than 1500 miles. Here is your chance to save big and get a set of almost brand-new brakes. Complete set of front brakes, including new right and left calipers, new ceramic brake pads, and new brake hoses. Good used set. 

On Demand Video
$6.99

W163 ML Pressure Brake Bleed Procedures - On Demand Video

How to use our pressure bleeder and capture tank to air bleed and flush your brake fluid system.

Kent will show you how he does a pressure brake bleed on an ML320 after a full system brake replacement. This step-by-step instructional video is xxx-minutes in length.

$285.00
Currently out of stock.

Late W113, W108, W109, Early R107, Some W114 and W115 Brake Master Cylinder

GENUINE MERCEDES -- ONE AVAILABLE
Please study application notes below: Some chassis are year specific - others are vin number specific - Free master cylinder bleeder kit and complete 30 minute video instructions. Comes with Kent's full on-demand video on removal, installation and bench bleeding procedure. Brand new brake maste
$99.50

Late 123 Chassis Brake Master Cylinder Install Kit - Order by Vin Number Only

Introductory Special! For most 1980 to 1985 240D 300D 300CD 300TD 280E 280CE w / bleed kit and video instructions

We are the only company in the world that will offer you a master cylinder with a bench bleeding kit and full 30-minute video instructions on how you can do this yourself!

This kit will work on the following models:

$26.75

Diesel Fuel Injector Return Fuel Hose AND Brake Pad Service Tool

Easy way to remove and reinstall that hard to reach small injector fuel return hose and vacuum hose - AND works on brake pads too!!!

While working on the fuel injectors of a 240D this week, Kent finally decided he had had enough. After 20 years of fighting those fuel injector return hoses he decided he just had to come up with a tool to make the job easier. 2 hours later the tool was designed and the prototype made.

On Demand Video
$8.99

722.3 722.4 Video Class Pt. 5 - K1 K2 Drum Open and Modification - On Demand Video

Part 5 is no longer sold separately. It comes included in Kent’s Full 12-Part Transmission Overhaul Class. See related products below to order.

These are probably the most important internal seals that you need to replace. Pressure loss in the K1 and K2 is probably the primary reason for delayed shifts and flares between shifts. This is the first part in resealing these important brake drums.

On Demand Video
Dragging Brake Dust - On Demand Video
$9.99

Testing for and Troubleshooting Causes of Dragging / Sticking Brakes - On Demand Video

Could be multiple causes - don't assume it is a bad caliper!

Old cars and brake issues go hand in hand. Especially if the car is not driving very often. Brake problems usually first show up as “dragging” or sticking brakes. If this issue is not dealt with immediately it can lead to serious problem including the car catching on fire. 

 

$36.20

W163 ML Ceramic REAR Brake Pad Set with Hardware

Posi-quiet feature with reduced brake pad dust. For ML320 ML430 and ML500 (First generation ML only)

You will love the quiet, solid braking with these pads and the lack of dirty-looking wheels after a long road trip

$16.80

W126 Front Suspension Brake Control Rod Bracket Long Bolts

You may need to replace these if yours are very rusty. They do not come in the joint repair kits.

These are the 4 long bolts that need to be removed when changing your W126 brake rod control joint on your front suspension. There are two on each side. They do not come in the repair kit so if you bolts are very rusty you might want to have these new bolts on hand before you start your repair.

$34.95

Cooling System Leak Detection Radiator Cap Conversion for Brake Bleeder Tank

UPDATE: 6/25/25. NEW design. Does not require adjustment. Allows you to use our brake bleeder tank to also pressure test the cooling system on most models 1973 to 1995 ( see design of metal cap to confirm )

Have you ever had a hard time finally a very small coolant leak? Do you find yourself adding small amounts of coolant but can not see any leak? Is there a funny smell coming from inside your Benz when you run the heater?

Sale
$32.50

Full 12-Part Transmission Video Class - How to Overhaul the 722.3 and 722.4 Transmissions - On Demand Video Series

5 hours in length. Read what is covered below. Covers most 1981 to 1995 automatic transmissions.

This is Kent's full class on overhauling these old transmissions. They all need help now, not because they are mechanically worn out, but rather because all the old rubber lip seals and O-rings are hard and worn out. They all need resealing!  Valve body overhaul is NOT covered in this series.

$192.00

W126 Brake Control Rod Ball Joint Bushing Kit (Guide Rod Mounts x 2)

*The most common ront suspension wear point on ALL 126 Chassis from 1981 to 1991

PLEASE READ THE ALERT BELOW BEFORE ORDERING. If your 126 sedan or SEC coupe is making front end clunking noises when you brake or go over bumps at slow speed you most likely need to replace the bushings where the lower front suspension guide rod attaches to a body subframe casting.

$119.50

Mercedes 61x Diesel Injection Pump Timing and Brake Bleeding - Kent's Collection

A collection of most of the products you will need to successfully DIY your diesel injection pump timing

Kent put together the three most important products you will need to use his pressurized method of setting the critical timing on your diesel engine injection pump. This is often negelected and when corrected can lead to faster starts, better fuel economy and less engine smoke.

$29.75

Front Brake Pad Sensor Wire Removal and Replacement Tool

Works on the Following: All 107,116,123 and 126 Chassis from 1973-1991.

Have you ever tried to get those old stuck pad sensors off your front calipers? Have you had much success doing it without damaging at least one wire? Kent has had the same frustration over the years so finally designed a custom tool for the job.

On Demand Video
$7.99

722.3 722.4 Transmission Overhaul Checking B1 Piston Release Pressure - On Demand Video

This is very important - Too loose and you will get flaring between 2nd and 3rd. Too tight shift will jerk

When you are resealing or rebuilding, or even just working on the B1 piston, you need to check the release pressure. This is done by measuring the distance the piston has to travel before the brake band clamps onto the K2 drum. This should NOT be neglected.

On Demand Video
$18.99

Setting Up Mercedessource Coolant System Pressure Tester Cap - On Demand Video

Video instruction that comes free with the purchase of your custom radiator pressure testing cap and hardware

In this video, Kent will walk you through the steps needed to convert your older Brake Bleeder tank to one that can continue to bleed brake systems as well as pressure test radiators and cooling systems.

On Demand Video
$21.99

W126 Front Suspension Guide Rod Ball Joint Installation Instructions - ON DEMAND VIDEO

Kent goes over the install procedure step by step with his normal assortment of time saving tips and tricks.

This on-demand video will take you through the process of replacing the worn-out ball joint bushings that connect to the front suspension guide rod on all W126 sedans and couple built from 1980 to 1991. This video comes free of charge when you purchase our complete repair kit.

$495.00

W123, W115, Early R107, Early W126 Right Rear Trailing Arm - USED

Fits all W114, W115, W123 and W126 to 1985. No salt corrosion. Very good condition with cable and emergency brake shoes.

Good usable passenger side rear trailing arm. No rust through.  This was removed from a 1983 W123 300D, so if you install it in another chassis, you will have to change the emergency brake cable. PLEASE NOTE.

Pages