Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
This tune up kit fits the 6 cylinder twin cam engine in the 1990 to 1993 300SL, the 1990 to 1992 300CE coupe, and the 1992 to 1993 300SE 140 Sedan. Why this tune up kit and why do I call it run insurance? Let me explain:
W116 driver power window failure is very common. It happened to Kent's personal 1979 300SD.
These steel cupped heat shields go under the rubber mounts to help deflect heat and grease away. In most cases (unless your engine is severely shaking) they will prolong the life of the rubber mounts.
Anytime you need to replace your rear shocks/struts, you must drop the rear control arm. If you are doing other rear suspension work, you may need to drop it as well. Kent came up with this tool kit when he was converting his SL500 to conventional coil-over shock absorbers.
High quality fast break in pads with special coated anti-squeal pad bonded to the back side of the pad. We include 4 new sensor wires and a small ceramic brake pad grease to lube the pad edges and the pins. ( no need to lube the back side).
We love the quality of Bremi wires. Kent prefers them on his own cars. We even throw in some silicone grease and show you how to apply it.
We know you want the best for your 560 engine. These ARE the best tune-up parts you can buy. To add new spark plugs see related products below:
In this 20-minute instructional video, Kent will walk you through the steps of getting the steel sunroof panel installed properly back into the car's roof. The first step will require cleaning, inspection, and possible replacement of the plastic slides.
Power Hirschmann antennas are no longer available new. It is possible to remove and repair the old Hirschmanns if you are willing to dig in and spend time cleaning, adjusting, lubing, etc.
You want superior stopping performance as well as minimum brake dust on your wheels - then these pads are what you want. Watch the video below - they are also really pretty! :-)
This kit includes two pump motor seals and two silicone plugs for the extra hole (if needed). Some tanks have only one pump, some have one pump and one plug, and some have two pumps. So we give you two or each for any combination you may run into and you may end up have a spare or spares.
Want to try to make your car's engine and engine compartment look like it just came off the showroom? Would you like detailed information on the chemicals, brushes, tools, and procedures Kent uses to get his engine compartments looking so nice?
If a car has sat outside in the elements for long periods and has not been washed or waxed in months there are some things you need to do BEFORE you apply the buffer to the body and the final wax to the paint. This is where you will need some real "elbow grease."
When Kent set out to find a good fender cover for his own use he and Kaia decided to make it available to our customers. Who doesn't like a good soft fender cover that stays in place? We know red shows the grease more than black but you have to admit these are a knockout!
Sil-Glyde is a silicone based brake lubricant recommended for the entire brake assembly and is compatible with rubber. It is moisture-proof and heat resistant to +600 degrees F, which means it won't burn-off like other brake noise products.
SINGLE AXLE KIT: This set of boots will work on ONE (1) axle of the BOLT TYPE. This will not work if you have the crimped can type axles. SEE PICTURE BELOW TO CONFIRM IF YOUR AXLE MATCHES THIS TYPE! If you order the wrong boots by mistake they are not returnable.
Brand new complete wheel bearing kit. Includes all parts shown for right or left wheel. You with need to order 2 if you want a complete set of wheel bearings for both sides.
This must-have kit does not only have hard-to-find metric sizing, but the o-rings are made out of nitrile which holds up better to heat and is more resistant to oil, grease, hydraulic fluid, silicone and even water.
New inner front wheel bearing seal. Fits right or left side. Should be replaced when repacking wheels bearings with new grease. NOTE: DOES NOT work on cars with ABS brakes.
New Bremi distributor rotor fits models listed above from 1986 to 1991. Check yours now for heavy burn marks or arcing.
New Bosch distributor cap fits models listed above from 1986 to 1991. Check yours now for cracks or arching.
FITS THE FOLLOWING: 1985 to 1993 W124, W126, and W201 chassis with a 6 cylinder 103 engine. Is your M103 six cylinder engine not running as smoothly as it use to. These wires should be changed at 70,0000 to 80,000 miles for smooth running and peak performance.
I figured out why the spark plugs in these V6 engines don't seem to ever get changed.
If you own a 1998 to 2006 Mercedes with a V6 (M112) or a V8 (M113) engine this is one job you will have to deal with at some point. Just pull the top cover off your engine and look. Even cars with low mileage may have oil seeping out the breather covers on the top of the heads.
FITS ALL 190E and 190D 1984 TO 1993. This is the repair manual you 201 owners have been waiting for. If your blower motor has been intermittent, or some days it will not come on until you drive for a while, your heater motor brushes are most likely at the end of their life.
Since the original style Bosch electric water pumps are no longer available NEW. If you need a replacement pump, you have three options. 1. Buy a used pump. 2. Buy our newer pump conversion upgrade. 3. Take your inoperable pump out of the system.
Note: Works only on models that have two vacuum lines coming of the pump cover. I am seeing lots of vacuum pump problems with the older diesels. They are reaching that age regardless of mileage where the pumps are failing right and left.
Fits chassis models W114 W115 W116 R107(except 500SL and 560SL)W123 (do NOT FIT WAGONS) and W126 ( except 500 series 500SEL, 560SEL, 560SEC) from 1972 to 1991.
For most U.S. V6 and V8 engines from 1998 to 2006 with mass air flow sensor at the back center of the engine.
WILL NOT FIT AMG ENGINES.
Do you want to make the rear end ride like a new R107 - Then you have to replace the key suspension rubber parts that attach the rear suspension to the car. This kit has the parts you need. No instructions.
Kits contains:
This is a BIG problem! Failure to fix it can shorten engine life by allowing dirt to enter the combustion chambers thus damaging the piston rings which lead to low compression, poor fuel economy, hard starting, high oil consumption and loss of power.
FITS THE FOLLOWING: 116,123,126, 5 cylinder turbo diesels with an air filter on the engine, from 1978 to 1985. Fix that rattling air cleaner housing now.
Fuses, supplies, and video instructions (below) to restore most older fuse boxes to better than original condition.
Fuses, supplies, tools and video instructions (below) to restore most older fuse boxes to better than original condition.
In this video Kent shares his secrets on how to make the inside of an old Benz look like new again. Now granted, you must have a reasonably good car to start with. He is not going to show you how to reupholster, change seats and door panels, etc.
In this 30 minute-long video Kent will walk you through what he did for the rear suspension on his 1983 240D.
Old cars and brake issues go hand in hand. Especially if the car is not driving very often. Brake problems usually first show up as “dragging” or sticking brakes. If this issue is not dealt with immediately it can lead to serious problem including the car catching on fire.
I have been discovering this is one of those maintenance areas that suffers from severe neglect. Failure of the rubber support or center drive shaft bearing can cause all types of improperly diagnosed vibration problems - some commonly change with vehicle speed.
I have been discovering this is one of those maintenance areas that suffers from severe neglect. Failure of the rubber support or center drive shaft bearing can cause all types of improperly diagnosed vibration problems - some commonly change with vehicle speed.
I have been discovering this is one of those maintenance areas that suffers from severe neglect. Failure of the rubber support or center drive shaft bearing can cause all types of improperly diagnosed vibration problems - some commonly change with vehicle speed.
There is nothing better than a good buff and wax to bring out the shine on an old Benz. Particularly if the car has not been waxed in a couple years! The results are directly related to the amount of work you put into it.
WARNING: We are finding that people are replacing axles from other models that have different size boots. This kit will ONLY replace boots on ORIGINAL AXLES!! BOOTS PROVIDED IN THIS KIT FOR INNER AND OUTER ARE THE SAME SIZE. AXLE END I.D. is approx 7/8". CAN END OF BOOT I.D.
Tired of having to pull and hold the glow / starter knob on your old 110 or 115 chassis diesel? Hand getting tired? Waiting forever to get the glow plugs hot enough to start the engine? Wish the glow plugs would not burn out so often?
Can be installed on the following models: Please read carefully. All Turbo 116 and 126 300SD 1978 to 1985. All 123 turbo and non turbo 240D 300D 300CD 300TD 1980 to 1985. 1984 to 1989 201 190D. 1986 to 1991 126 300SDL 350SD and 350SDL. 1986 to 1993 124 300D and 300TD.
PLEASE NOTE: Possible shipping delay. This is a special order item and may take up to 7 days before we can ship it!
Fits the Following, 1975 to 1976 ONLY 115 chassis 300D and 123 chassis 300D 300CD and 300TD from 1977 to 1979 with series style loop glow plugs. SVO / WVO applicable. If you are tired of glow plug problems, then this kit is made for you.
PLEASE NOTE: We have been having problems recently obtaining these brackets. Turbo owner you may want to get a backup now before these are gone forever. If you order there could be a short shipping delay. Complete Kit as shown with installation tips included.
If you own an older Mercedes sedan or wagon, it is a very good idea to remove all four door panels, repair components, clean drains, and, most importantly, lubricate all moving parts, as Kent explains in numerous YouTube videos.