Search | W126

Displaying 1 - 50 of 1041
On Demand Video
Cleaning and Detailing a Mercedes Engine Compartment- On Demand Video Instruction
$4.99

Extreme Detailing Part 4: Cleaning and Detailing an Engine Compartment Safely - On Demand Video

Kent will show you how to get it super clean with minimal water and overspray

In this 14-minute video instruction, you will get to see how Kent cleans and details an engine compartment in a W210 E430 using his favorite chemicals and techniques. This includes using less than a gallon of water and controlling the spray rinse so you protect sensitive electrical components.

$238.00
Currently out of stock.

OM617 Turbo Diesel Automatic Transmission Bowden Cable w/Tool - USED

Very good condition ---- Fits 1981 to 1984 Turbo 300D, 300CD, 300TD and 300SD with tool and free video instructions

ONLY ONE AVAILABLE. Very good used working Bowden cable with good plastic threads on the adjuster. No longer available new. This will not fit the 1985 transmissions with the black modulator. It comes with installation instructions and Kent's special-made removal and installation tool.

$49.95

OM616 and OM617 Diesel Engine HIGH Pressure Injection Pump Timing Kit

Comes with HOUR LONG VIDEO instructions. Requires pressure tank for accurate and consistent results.

Kent's procedure uses the factory recommended "drip tube method" but with a "twist." He has devised a way to get accurate and consistant IP timing results while trying to get the drip tube to drip at one drip per second exactly when it should!

On Demand Video
$19.99

Door Hinge and Latch Lubrication Procedures - On Demand Video

With the right grease gun and lubricants you can make your doors close oh so smoothly!

Door hinge lubrication has to be one of the most neglected maintenance items on the older models. I think part of the problem stems from the fact owners don't know how to do it or don't know how to acquire the proper grease gun to lubricate those special fittings on the door hinges.

$89.95

Complete Lubrication Kit w/ Applicators in Carrying Case

This is your grab-n-go for all your lubrication needs on your older Benz

If you own and maintain an older car (especially 15 years and older) you must be willing to take care of its lubrication needs or you may spend big money later in repairs.

$46.95

Door Hinge Complete Lube Kit w/ Video Instructions

Do not neglect the door hinges and latches on your older Benz

Ever wish you could find a good way to lube the door hinges on your old Benz? Maybe you have seen that little fitting wondering what it is, or maybe you have heard there is a special grease gun that can inject grease into that fitting?

On Demand Video
$12.99

60x Diesel Engine Fuel Warmer Bypass Instructions - On Demand Video

For 1984 to 1995 OM601 OM602 and OM603 engines in W201, W124, W126 and W140 Chassis

Mercedes installed small fuel warmers on these engines using engine coolant to warm up the fuel just before it enters the injection pump. The idea is great - especially in cold climates, but in moderate and warmer climates it is probably not needed.

$19.50
Currently out of stock.

Heavy Duty Reinforced Rubber Jack Stand Top to Body Protecters

Best way to protect the underside of your car from rust and to keep the jack stand from slipping

Over the years Kent has used a number of different things to place on top his jack stands to prevent damage and for added security. He has even tried some of the commercially available jack stand plastic covers. Nothing has proven to work better than the special cut reinforced hose shown here.

$3.85

Windshield Washer Squirt Nozzle Cleaning and Adjusting Tools

2 wire tool set - One to clean and one to adjust - watch video below for details

Are you tired of windshield washers sprayers that done spray straight or don't spray at all. If you can hear the pump running but no fluid is coming out the nozzles it could be the nozzle holes are plugged with dirt.

$14.75

Hirschmann Power Antenna Mast Cleaning and Lubrication Kit

Extend the life of your power antenna by cleaning and regular lubrication

"I have heard some owners complain about the unreliability of those older Hirschmann power antennas. I would say that in at least 80 percent of the few hundred antennas I have taken apart that went bad - the reason was lack of lubrication!

$84.50

DELUXE Windshield Fine Scratch Removal and Glass Deluxe Polishing Kit w/ Power Tool

WARNING! Not guaranteed to work on all scratches. WILL NOT WORK ON SAND PITS. Do finger test on wiper scratches BEFORE ordering!!! Read and see more below.

Contains all supplies and video instructions you need - including a high speed power multitool to remove very fine scratches. Purchase together and save $$$$. Ever wish you could get rid of the annoying wiper scratches on your front windshield (or rear hatch glass if you have a rear wiper)?

$49.95

Windshield Fine Scratch Removal and Glass Polishing Kit

WARNING! Not guaranteed to work on all scratches. WILL NOT WORK ON SAND PITS. Do finger test on wiper scratches BEFORE ordering!!! Read and see more below.

Contains all supplies and video instructions you need - except a multitool (see description. )Ever wish you could get rid of the annoying wiper scratches on your front windshield (or rear hatch glass if you have a rear wiper)?

On Demand Video
$15.99

How to Remove Fine Scratches from Your Car's Windshield - On Demand Video

Video instructions using Kent's glass polish kit to remove scratches with less mess and less heat!

This video will take you step by step through the process of using our glass polish kit with a multitool to remove those fine scratches from your windshield or rear hatch glass. It also works great for polishing the water and acid rain out of any glass, including shower doors!

$134.50

OM617 Turbo Diesel Engine Timing Chain Tensioner

Turbo models only 1978 to 1985 300D 300TD 300CD and 300SD

Brand new Febi Bilstein part. WARNING: Must be installed properly or damage can occur to the timing chain and sprockets. Kent always recommends you replace the tensioner when you install a new timing chain. NO INSTRUCTIONS. Instructions do not come with this part.

$8.95

Anti Corrosive Gel for Magnesium and Aluminum

For protecting clean and bare aluminum and magnesium engine parts

Kent has been working a long time to find a way to stop the ugly corrosion on aluminum and magnesium engine parts. Particularly valve covers and intake manifolds.

On Demand Video
$16.99

Modifying and Installing LED Dash Light Bulbs for Peak Performance - On Demand Video

Learn all Kent's tricks to getting maximum performance out of LED dash lights for W123 W126 W201 and W124

These instructions cover problems you may have with your bulb holders, how to set up the new LED bulbs to do TIGHTLY into the bulbs holders so they won't come loose and go out on you, and how to modify and experiment with the maximum brightness of an individual LED bulb.

$26.75

Diesel Fuel Injector Return Fuel Hose AND Brake Pad Service Tool

Easy way to remove and reinstall that hard to reach small injector fuel return hose and vacuum hose - AND works on brake pads too!!!

While working on the fuel injectors of a 240D this week, Kent finally decided he had had enough. After 20 years of fighting those fuel injector return hoses he decided he just had to come up with a tool to make the job easier. 2 hours later the tool was designed and the prototype made.

$32.95

Early 4 and 5 Cylinder Diesel Fuel Injector Hose and Injector Washer Kit

For fuel injector service on 220D 240D 300D 300CD 300TD and 300SD 1970 to 1985

Any time you are removing and replacing your fuel injectors you will need to change the return hose and the heat shield crush washers. If you don’t, you will have leaking hoses and possible compression leaks at the injector nozzles.

On Demand Video
$2.00

How to Clean Out Plugged Sunroof Drains on 1965 to 1995 Models

Part of Kent's $2 tip video collection. The tip will only cost $2 but you could save considerable money and grief by watching this video.

In this short 2:32 minute video Kent will show you how he first tests the sunroof drains for blockage and then how he goes about cleaning out any blockage.

$35.75

1/4 Inch Drive Beam Type Super Low Torque Wrench

Very accurate for low torque settings - 0 to 9 Newton Meters or 0 - 80 inch pounds

If you are tired of "guessing" on those critical low torque settings maybe it is time to get a small torque wrench. This is the one Kent likes for super low torque settings up. It is quality made and will not cost you an arm and a leg. You can even calibrate it yourself!

$30.99

Gas Engine Spins But Won’t Start - Video Class with Kent Bergsma

Watch all seven videos in this series - and learn how to get your gas Mercedes starting and idling better.

Too many emails on this subject pretty much forced Kent to do this almost 3 hour long video class. If you are having problem starting your old 1976 to 1993 Mercedes with Bosch C.I.S. fuel injection this is a must see.

On Demand Video
$9.99

How to Use Kent's New Instrument Cluster Removal Tools - On Demand Video

Tips and tricks to get those stubborn clusters out of the dash

This video is free with the purchase of Kent's new dash cluster pull tool set. If you just want to see how he uses the tools and some tricks to get difficult clusters out you are welcome to purchase this video separately.  Approximate run time is 20 minutes.

$34.75

R107 W116 W123 W126 W201 W124 R129 W140 Instrument Cluster Removal Tools

With Free Video Instructions - For most models from 1972 to 1999

Removing a Mercedes instrument cluster from any of the chassis listed is easy with these special "pull" tools. Many owners do not realize that the instrument cluster is just pushed into the dash panel and not held in with any bolts or screws.

$42.50

Snap Cap Style Ignition Tumbler Service and Replacement Deluxe Tool Kit w/ Extras

Service or replace your ignition tumbler sitting in your car with Kent's custom tools and FREE detailed video

If you have been around old Mercedes for any length of time, you have probably run into a problem with your ignition key starting to "stick" or one that does not turn.  This problem can leave you stranded and could cost hundreds of dollars to fix $$$.

On Demand Video
$14.99

Replacing and Servicing Screw Cap Style Ignition Key Tumbler Assemblies - On Demand Video

For select models 1975 to 1989. With the right tools and knowledge you can do this yourself sitting in the car!

This video is not only going to show you how to remove and replace the “screw cap” style tumbler, but it also going to explain the theory of operation and how to avoid certain pitfalls when doing this job yourself. And YES, there are pit falls.

$39.50

Screw Cap Style Ignition Tumbler Service and Replacement Tool Kit

Do tumbler service and replacement inside the car with Kent's custom tools and FREE detailed VIDEO instructions

If you have been around old Mercedes for any length of time, you have probably run into a problem with your ignition key starting to "stick" or one that would not turn.  This problem can leave you stranded and could cost hundreds of dollars to fix $$$.

On Demand Video
Mercedes Muffler Repair - On Demand Video
$12.99

Center and Rear Muffler and Exhaust Pipe Replacement and/or Repair - On Demand Video

Common Rear Exhaust leak troubleshooting, component replacement and hole patching DIY techniques

How can you tell if you have a hole or leak in your exhaust system? What are the symptoms? Can the leak be patched? When will you have to get either a new center muffler or rear muffler or pipes or all three? Can you replace the mufflers yourself and what are the tricks?

$29.50

Custom Made Large Angled Head Clamping Tool

Multiple uses for hose removal, assembly, and holding parts safely for cleaning and polishing.

This is one of Kent's favorite tools around his shop. It is used almost daily. The tool rose out of a need to be able to safely hold fuel inectors while cleaning when with a large high speed wire wheel. No tool like this is availabe so it had to be built in our shop!

On Demand Video
Dragging Brake Dust - On Demand Video
$9.99

Testing for and Troubleshooting Causes of Dragging / Sticking Brakes - On Demand Video

Could be multiple causes - don't assume it is a bad caliper!

Old cars and brake issues go hand in hand. Especially if the car is not driving very often. Brake problems usually first show up as “dragging” or sticking brakes. If this issue is not dealt with immediately it can lead to serious problem including the car catching on fire. 

 

$12.25

Garrett T3 Turbocharger Compressor Housing Gasket

Fits Garrett Turbo chargers only 1978 to 1987 - 300D 300CD 300TD 300SD and 300SDL

This is the highly specialized paper gasket that seals the center section forward bearing plate to the compressor wheel housing as shown below:

On Demand Video
$5.99

No Cost Steps to Fixing an Engine's High Idle Speed Problem - On Demand Video

Kent is always amazed at how often it is the simple things! You won't believe how easy it was to fix this engine!!

This video will be an excellent example of how to save big $$$ doing the work on your own car. If your gas engine is idling too fast in neutral it could be an expensive problem, but in many cases it is due to lack of maintenance over a long period of time.

On Demand Video
Mercedes Benz Impulse Codes - On Demand Video
$3.99

Read and Clear Check Engine Light Codes: 1988 to 1995 Mercedes - On Demand Video

Learning how to do this yourself could save you hundreds of dollars $$$$$$$$$

If you have a Mercedes of this era equipped with an impulse code reader you will find a little numbered black box similar to the one in the pictured here in your engine compartment. It is located over by the battery and may have a black cover on it that can be lifted off.

On Demand Video
Broken Radiator Neck - On Demand Video
$16.99

Repairing a Broken Plastic Upper Radiator Neck - On Demand Video

With the right products and procedures this can be safely done in most cases

Kent starts out the video talking about prevention by using the neck reinforcement kit he has been selling for years. In the case of his own 1990 300SL the neck had not been reinforced and it broke cleanly right in the middle.

$31.95

Plastic Radiator Broken Upper Neck Repair Kit

This will repair most cracked or broken upper radiator necks - Free video instructions

Another great solution from Mercedessource!

1978 to 1995 Mercedes only

A broken radiator neck can be safely repaired if it breaks off cleanly in the center or aft of the center of the neck. If it breaks off too close to the tank or breaks off in multiple small pieces then we advise that you replace the radiator.

Pages