Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
This is one set that will pretty much do it all: door panels, radio, windows, interior trim, exterior trim, engine, fastener plugs, seals, etc. Strong enough to even change a bicycle tire...
Get rid of that old and ineffective transmission fluid in your older power steering system. It is the number one cause of excessive gear wear in your steering box. This is our partial kit that does not include the fluids so it can be shipped by air mail. Please study the pictures here.
Kent video instructions will take you through the process of flushing out the old automatic transmission fluid and replacing it with modern enhanced power steering fluid. This procedure was filled on a W108 280SE 6 cylinder sedan.
Get rid of that old and ineffective transmission fluid in your older power steering system. It is the number one cause of excessive gear wear in your steering box. This kit will include almost everything you will need to do this yourself, along with complete step-by-step video instructions.
This is the hose on the left side of your engine that seems to always rot and leak power steering fluid. If you look closely at it you will most likely see small cracks in the hose. This is the larger size hose used on those early models with power steering from the early 1960's through 1976.
This is the very best hose Kent has found to use to install spark plugs in restricted spaces. Watch the video below and he will demonstrate.
Kent finally went to work to solve the problem of rusty water pump mounting bolts. Once the problem was studied carefully the solution became obvious. Watch the video for a full explanation and partial instructions below.
Kit contents:
Keeping your throttle linkage ball sockets and pivot points lubricated extends the life of the parts and maintains top performance for the engine as well as some of the later transmissions.
This video will show Kent's technique on how to prime and paint alloy wheels using our wheel paint kit and masking dam that we sell separately. See below. The techniques will also apply to any spray can paint you should choose to use.
Want the best, fastest, and easiest way to polish faded anodized aluminum trim, to remove fine scratches from your glass, to loosen rusted and stuck fittings and bolts, and to sand rust out of tight places? - enter the multitool or multi-function tool.
This is a full 25-minute step-by-step instructional video on how to properly flush or bleed your brake system using our pressure brake bleeder and fluid capture tank.
If you already have a multi-function tool or you plan to buy either our glass or anodized aluminum polish kit ( see below ) you really don't need a second tool unless you want to dedicate one just for "banging" on rusty fittings and bolts. We offer this same kit with the tool included.
In this video, Kent explains the correct procedure for cleaning and lubricating your hubs and rear brake rotor BEFORE you install your wheels. He hardly ever sees this done when removing wheels on 15 plus-year-old Mercedes so he knows it is almost ALWAYS neglected.
This tank works amazing! Put in the heavy rear end or trans fluid. Pump up the pressure. Stick the non-fall-out end in to fill hole... and just push on the valve in the handle of the filling wand.
Kent came up with this kit because of all the times he replaced e-brake shoes only to end up with battered knuckles and extreme headaches. This video is included free with the purchase of the toolkit.
This video is intended to be used as instructions when purchasing Kent's Rust Buster Tool. It can be viewed separately but you will need the tool to apply the principles. This video is included free of charge when purchasing the tool. See related products below:
Have you dreaded changing the rear end fluid before because it is a pain and ends up being really "messy?" Kent finally decided there had to be a better way so he went to work and came up with the idea of using a simple and affordable custom made pressure tank to "flush" and refill differentials
This video will take all the "mystery" away... For all W116, W123, and W126 Turbo Diesel 5
One day Kent "finally had it!" Replacing parking brake shoes was always a dreaded job. As he thought about it he realized the frustration was mostly due to the hassle of getting all the holding springs on and off. So he set out to develop a new tool.
These are Kent's favorites. As shown in this video on youtube. Pack of 5 shipped.
Maybe you have even tried this only to have to patch fall on the floor when you walk away... ( it has happened to Kent... :-) ).
NOTE: Ships UPS ground only. Select ground for entire order to save in shipping costs. I am a great fan of LubroMoly products.
This can happen when you least expect it! It happened to me right when I purchased a W109 300SEL and it can be really frustrating.
FREE ONE-INCH BRUSH INCLUDED. This super-fine cloth, along with Miracle Paint, can really do some fine rust repair detailing. You can use it on a rough pitted area that you want to smooth out. Put on a couple of layers of cloth and coat with Miracle Paint.
This is a must-have if you have a prized Benz or any car you don't drive often!! If you let any of your cars sit for long periods ( generally over 30 days) without driving them, you can ruin your battery, especially if you let it go completely dead.
I do not need to say much about this tool. Well made and well thought out. Someone who obviously was frustrated at scratching the finish on his or her alloy wheels came up with this idea. Watch the video below to see why this is now my favorite go it 17 mm lug bolt socket.
Works on W114, W115, R107, W116, W123 and W126. A better performing and more comfortable 14mm hex wrench to use when changing the fluid in your rear end. Will work on manual transmission with 14mm drain plug only. Watch the video to see why.
These are the instructions that come with our black engine and chassis paint restoration kit, but they will help you successfully spray paint almost anythings. These step-by-step techniques were developed by Kent over almost 60 years of spray painting cars and parts.
UPS GROUND ONLY: This is the best spray can paint Kent has found to detail the semi-gloss black parts on your Benz. It is not easy to find a good spray can paint!
2 large style clamps to be used on upper and lower radiator hoses. Use these to replace your thermostat or water pump without having to drain all your coolant out of the radiator. Works on medium size coolant hoses also.
If you have been enjoying Kent's free Youtube videos but have not yet purchased and watched one of his on-demand "meat and potatoes" videos, we guarantee you are really missing something.
In this video instruction Kent will show you how he installs our battery tender kit in a W124 Mercedes.
This 24 minute on demand training video comes with our injector back flush cleaning kit. You can purchase this video separately, but please keep in mind you will not have any of the tools or supplies to complete this procedure yourself.
With these old gas fuel injectors, sometimes you just have to "back flush" the insides to restore them to peak performance. There is no guarantee that back flush cleaning will restore every old gasoline mechanical fuel injector. Some are just plain worn out.
Over the years I have used lots of different methods to clean off rust before applying Miracle Paint. This is the best and quickest method I have found. This is a great tool that can be used for many other things like cleaning off brake hubs and rotors.
These early “short style” electric fuel pumps are very prone to leaking fuel because the rubber case o-ring seals harden with age. New pumps are no longer available and rebuilt are VERY expensive! If you risk buying a used one it will probably end up leaking or seeping fuel too.
This 28 minute on demand video manual will take you through the step-by-step procedure for taking the upper (motor section) of a short MFI fuel pump apart and replacing three o-rings that are prone to hardening and leaking fuel.
We have been looking for a long time to find a super strong and well made tool to adjust those tough 17 mm ball adjuster sockets on the early 4 and 6 clyinder gas engines.
This U.S.A. made 17 mm 8 inch long combination wrench is custom modified here in our shop to help you easily install Bilstein front and rear shocks on most of the older model Mercedes Benz.
In this video instruction, Kent will demonstrate how to check for one possible source of a mysterious front end clunking sound. Any clunking noise you hear when driving over rough ground or when braking should be investigated immediately.
After years of "fighting" fuse replacement, Kent finally decided he had had enough! And so was born another special tool. It is designed to securely grab hold of a ceramic fuse, remove it from it, and replace it with minimal exertion and no damage.
These are the instructions that come with Kent's brake pad and brake caliper service kit. It is possible to make your own service kit by watching this video. To purchase the kit see related products below. To learn more about the importance of this kit watch the video below:
Brakes are one of the most often neglected maintenance items on older cars. This is not just related to Mercedes Benz. Most owners don’t realize that brakes need special attention and service not only when pads are changed but every 2 years.
This is a collection of SPECIAL tools Kent has put together to help you grab, twist, and pull on things in and around your Mercedes. He makes each one of these tools right here in his shop.
Want to try to make your car's engine and engine compartment look like it just came off the showroom? Would you like detailed information on the chemicals, brushes, tools, and procedures Kent uses to get his engine compartments looking so nice?
Valve adjustment is often neglected on many of the mid 1950's to early 1970's 6 cylinder single overhead camshaft gas engines. If it has been years since any adjustment was made, there will be problems - Kent can guarantee it!!!
These are all 3/8 inch drive hex sockets. All are the same length 11 cm total length. These are great to have with the short hex just won't reach long enough.
The 1/4 inch drive sizes include 2, 2.5, 3, 4, 5, 5.5 and 6mm. The 3/8 inch drive sizes include 7, 8, 9, 10, and 12mm.
Indications that your seal needs replacing are tears in the lip and no resistance when you close your trunk. If you trunk snaps shut too easily it means the seal has collapsed and is no longer sealing properly.
This 12 page instructional downloadable booklet by Kent Bergsma covers brake bleeding equipment and procedures for all model Mercedes from the mid 1950s to the mid 1990s. This covers chassis Ponton 110 111 112 113 108 109 114 115 116 107 116 123 126 201 and 124.