All new 2006 to 2013 V6 and V8 engine repair kits! CLICK HERE to view AlL.
Fits 116, 123 and 126 chassis diesel 1977 to 1985 only. We have been sourcing these copper washers from Mercedes Benz and also including o-rings for a long time with our fuel filter kits, due to the fact that they do not come with the fuel filters.
This rubber ring fits in the cap of the engine fuel filter. Does not come with most replacement filters. Should be replaced every 3rd filter change unless you seal is damaged during service.
Fits all diesel Sedans AND coupes only from 1977 to 1999 (Does not fit wagons!) including chassis 116, 123, 126, 201, 124, 140 and 210 chassis. 190D 240D 300D 300CD 300SD 300SDL 350SD 350SDL 300D 2.5 and E300D 1977 to 1999. This is an important maintenance item.
Fits ONLY 110 and 115 chassis 200D, 220D, 240D and 300D from 1966 to 1976. This kit should give you at least a years supply of fuel filters for your diesel. You will receive 2 main fuel filters and 3 clear plastic high quality inline straight prefilters.
Fits 116, 123 and 126 chassis diesel 1977 to 1985 only, including the 240D 300D 300CD 300TD 300SD. This kit should give you at least a years supply of fuel filters for your diesel.
The original fuel filter has a rigid right-angle fitting, as shown in the pictures below. We do not provide this fitting in our fuel delivery kits as more often than not it can be removed from your old filter and installed in the new filter we provide.
Fits 201, 126 (after 1986) and 124 four, five and six cylinder diesel to 1993. This kit should give you at least a year supply of fuel filters for your diesel. You will receive 2 main fuel filters, 3 clear plastic inline high quality pre-filters, and two main fuel filter o-ring set.
For years I just used old shop rags to catch the drips - until I found this! What a great solution. Watch the video below for more details
Connect this small filter with attached hoses to the back of the injection pump and to the brown plastic vacuum line going to your ignition switch under the dash. The filter will do two things. 1. Help to trap oil coming out of a leaking shutoff valve before it gets to your ignition switch. 2.
Kent uses his 1976 240D that had sat idle for 6 years to demonstrate what needs to be done to get an old fuel system cleaned out and serviced properly. This always includes installing new fuel filters and sometimes will require replacing some of the rubber hoses.
Most owners do not have a big enough hex wrench to remove the fuel tank screen on those models that had the fuel tank right under the rear trunk floor. But the screen does need to be removed, inspected and cleaned due to the age of these cars.
It has now become essential that you replace this filter screen on these old cars, especially if they have been using gasoline with ethanol in it and the car has sat or sits for long periods without running.
For reasons of hoping to solve fuel filter leak problems Mercedes changed the center bolt design in some 1984 to 1985 model 123 300D 300TD 300CD and 126 300SD. Instead of one o-ring on the bolt they changed it to two orings (as shown iin the picture.
This unique tank not only functions as an emergency fuel tank, but it can also serve to help troubleshoot diesel engine performance problems as well as complete a clean and efficient diesel purge.
FITS all 116 123 Diesel and Gasoline, and 126 chassis from 1977 to 1985. Finally a socket to remove your fuel tank screen that really works. Most correct size sockets tend to be SO BIG that they require 3/4 inch drive ratchets and extensions to use them. Who has those in their tool box??
Why would you need to remove a fuel tank? If it is heavily rusted or contaminated sometimes it is just easier to find a good used fuel tank and replace it. Trying to clean a heavily gummed up fuel tank is a real challenge.
In this video, Kent will show you how to safely and cleanly remove the fuel from the tank on your older Benz. You will need to drain the fuel anytime you replace the back end hoses, the tank filter screen, the fuel pump or the fuel filter.
In this video Kent will go through the process step-by-step of properly installing new air filters in your 500 series larger V8 models produced after 2000. If not done properly you can damage the engine cover and possibly the engine itself.
For all MBZ diesel engines 1950 to 1999. Designed by Kent Bergsma. These are built at Mercedessource to control quality and production demands. Each one is tested here in our shop before shipping.
The Monark nozzles #120 are all gone, never to be remade. We do have a few hundred #128 nozzles still available. Kent and Kaia got together and started questioning why they would not work in the OM616 and OM617 engines. So in May of 2024 Kent decided to put them to the test.
This is a brand new Genuine Mercedes check valve for the fuel injection pump on 4 and 5 cylinder diesels 1977 to 1985. 2 new copper sealing rings are included. This valve is mounted on inside of pump in the fuel line going to the filter.
Fits all 116 diesel 300SD, and 123 240D 300D and 300CD and all 126 chassis diesels 300SD 300SDL 350SD/L. 1977 to 1991 (Does not fit wagons!). Wiill NOT work on 107 chassis. Receive a Related Bonus-Product FREE!
Those old hardened and discolored plastic fuel hoses in your diesel engine compartment probably need to be replaced. When they crack and break you can dump a ton of fuel out on the road before your engine quits and leaves you stranded.
Applies to all Mercedes: Pre 1960, 190SL, 110, 111, 112, 113, 114, 115, 108, 109, 107, 116, 123, 126, 201 and 124 chassis. If you ever need to replace a fuel tank, fuel pump, fuel filter, or fuel hose and don't want the fuel running down your arm here is the tool and will save the day!
I have used a lot of different clamping tools over the years to prevent fluids from leaking out when removing coolant, fuel, or brake fluid hoses. Most work ok. Some are hard to use in tight places. Many do not stop every last drip from coming out of the hose.
The Monark nozzles #120 are all gone, never to be remade. We do have a few hundred #128 nozzles still available. Kent and Kaia got together and started questioning why they would not work in the OM616 and OM617 engines.
You would be amazed at how much fuel can leak out of a fuel hose when you disconnect it from your tank or engine. This is an easy way to prevent messy spills.
This inexpensive kit will allow you to replace the old, hardened, and brittle fuel hose in your 601, 602, or 603 diesel's engine compartment, as well as those old, worn-out factory clamps, with new, high-quality, German style clamps that will not cut into the rubber hose.
Fits all 115 chassis. Mercedes Diesel engines from 1968 to 1976. This includes 220D, 240D and 300D. Here is a chance to pick up all those most used diesel engine service parts in one kit for one great price. These are high quality replacement and service parts.
Would you like to find out how well your old (1959 to 1972) mechancial gasoline fuel injectors are working? Now you can do it yourself at home with our custom bench mount hand pump pressure tester and cleaning kit. These are the full instructions that come FREE with the kit.
If your fuel gauge stops working or is not reading accurately, many times it can be repaired by removing it from the fuel tank, taking it apart and giving it a good internal cleaning of the contact points, float shaft, and wires.
Fits the following: These nozzles fit 1986 to 1993 603 Engines and 1987 (only) 124 chassis 300D and 300TD. Also fits 1994-1995 S350 ONLY. This is the critical inside wear part of the injector that delivers the fuel spray into the cylinder.
Fits Gasoline Models only! 1982-1983 380SEC, 1984-1985 380SE, 1984-1985 500SEL, 1987-1993 190E 2.6, 1986 to 1989 300E, 1990 -1993 300E 4matic, 1990-1992 300CE, 1988-1991 300SEL, 1992-1993 400E, 1986-1991 420SEL, 1986-1991 560S
FITS THE FOLLOWING: All Mercedes Diesel engines from 1977 to 1985 except 190D. This includes 123, 116, and 126 chassis 240D 300D 300TD 300CD and 300SD. Here is a chance to pick up all those most used diesel engine service parts in one kit for one great price.
WORKS ON THE FOLLOWING All diesel 110, 115, 116, 123, 126, 201, and 124 chassis. 190D, 200D, 220D, 240D, 300D, 300CD, 300TD, 300SDL, 350SD, 350SDL, E300D.When it comes to diesel engine performance this is your best bang for the buck.
For 1986 to 1993 with OM 603 6-cylinder 300D 300TD 300SD 300SDL 350SD and 350SDL. Also fits 1994-1995 S350. This kit includes Kent's new version 3 pressure tester.
This kit includes a New Mercedes OEM fuel tank filter screen along with a special tool I have made to remove and install it. It will save you the time and expense of running out and buying a great big Allen wrench.
Here is a set of three straight inline fuel pre filters with strong plastic nipples and reinforced housing that fit 8 mm or 5/16 fuel hose.
PLEASE NOTE: WE SHIP EITHER FEBI OR HENGST AND COLOR OF FILTER SCREEN CAN VARY, DEPENDING ON WHAT IS AVAILABLE.
PLEASE NOTE: This item can ONLY be shipped UPS Ground. Diesel purge is amazing stuff! It is getting so popular that we have decided to offer it on the website individually, so now you can buy per can.
This socket is the correct size to use with our R107 Fuel Tank Screen Removal Tool ( See below:). It is a heavy-walled 27 mm black impact grade socket made in the U.S.A.
UPS ground shipping only. Can not be shipped internationally. Rather than try to explain what this kit does and how it does it we are going to ask you to watch the video below if you have not already done so.
Kent's procedure uses the factory recommended "drip tube method" but with a "twist." He has devised a way to get accurate and consistant IP timing results while trying to get the drip tube to drip at one drip per second exactly when it should!
FITS THE FOLLOWING: 201 chassis 190D 2.2 and 2.5 diesels from 1984 to 1989. 124 chassis 300D and 300TD 1987 and 1990 to 1993. 126 chassis 300SDL and 350SDL 1986-87 and 1990-91. Get your later model Mercedes diesel ready for winter driving with this self service kit.
Instructions to complete a diesel system purge. Does not include instructions on changing the filter
If you have had to remove any of the banjo bolts you can see that those sealing rings are getting quite old... when you see scoring in the ring the ring appears to be crushed, they should be replaced to prevent leaks and to prevent air from getting into the fuel lines.
This is a BIG problem! Failure to fix it can shorten engine life by allowing dirt to enter the combustion chambers thus damaging the piston rings which lead to low compression, poor fuel economy, hard starting, high oil consumption and loss of power.
This custom-made thin head wrench by Kent Bergsma can save the day and your pocketbook. It is very important that you hold the fitting base on the oil cooler when removing the oil cooler hoses. A regular 22mm wrench is almost always too thick and can also cause damage.
New Bosch pre-pump that mounts on side of injection pump. This is what makes your 60x. engine self priming and delivers fuel pressure to the injection pump.
If you have any Mercedes model with hydraulic self leveling suspension from the early 70's up to the early 1990's this is the correct fluid to use. High quality Meyle or Febi Bilstein product. Any other type of fluid can damage the seals and score your pump.